AVR ISP Programmer - USB - rhydoLABZ

(6) 4.67 out of 5 stars Write reviewReport bug
  • Part No :
  • PRO-2185
  • Availability:
  • In Stock
  • Shipping :
  • Same Day*
  • Weight:
  • 0.02Kg
  • Made By:
  • rhydoLABZ
  • Mfr.Part.No:
  • PRO-2185
  • Quality Rank:
  • 100/100
Rs 449
(Excluding GST.)
Rs 530
(Including GST)
530 rhydoLABZ.com New In Stock
  • Buy & earn 45  reward points
  • GST Invoice & Input Credit Available
Quantity :
Description: This is a simple to use USB AVR programmer. It is low cost, easy to use, works great with AVRDude, and is tested extensively on a Windows desktop. Based on Dick Streefland’s USBtiny and Limor Fried’s USBtinyISP. This is a low-cost programmer designed for those on a tight budget.

This programmer works really well for ATmega168 and ATmega328 and should work with all the AVR micros supported by AVRDUDE. The microcontroller-to-be-programmed can be any AVR with 64K or less of flash. This board is buffered and power protected so that you can do some really evil things to the programmer without killing it. It is fast! One of the greatest features of this board is the ability to power the target (up to 500mA) from the programmer.

Note: A mini-B USB cable is required to connect the Programmer to your computer which is not included in this package

Features:
  • Standard AVR ISP programmer
  • ATtiny2313 with USBtiny firmware preloaded
  • Buffered output
  • PTC fuse protected power
  • Programmer can power target
  • Slide Switch to select target powering
  • Supports ATmega168/328 and many others
  • Power LED, USB data LEDs and two status LEDs
  • Both 10-pin and 6-pin targets supported
Package Includes:
  • 1 x AVR ISP Programmer-USB
  • 1 x IDC Connector Cable
Resources:
Sort by: Recently  /  Helpful Write review

Excellent product

By Ganesh Kannan from Karnataka, India on May 19, 2017
Thank you for the wonderful product. this Is working cool and its much cheaper then other sellers.
I am expecting More products like this.
4 of 6 people found this review helpful
Was this review helpful to you?   Yes   No

Excellent product

By Babith from Calicut, India on May 19, 2016
Excellent product quality .The after sales support from the seller is really appreciable.
2 of 4 people found this review helpful
Was this review helpful to you?   Yes   No

By Aravind Nadal from N/A on February 05, 2016
I do have a atmega32 microcontroller, can I use this to program it?
2 of 4 people found this review helpful
Was this review helpful to you?   Yes   No

By Tech Support from N/A on January 01, 2016
The AVR ISP Programmer - USB can program any AVR microcontroller with under 64K of flash that is supported by AVRDUDE. The ATtiny4 fits this description, so it can be programmed too.

However, as per the datasheet for the ATtiny4 [ http://www.atmel.com/images/atmel-8127-avr-8-bit-microcontroller-attiny4-attiny5-attiny9-attiny10_datasheet.pdf ], this device only comes in 6-pin SOT and 8-pad UDFN packages. These chips would likely need to be soldered to a board and programmed in place.
2 of 4 people found this review helpful
Was this review helpful to you?   Yes   No

By Jyothis Guptha from N/A on December 31, 2015
Can we use this one to program the ATtiny4?? Which version of the AVRDUDE supports the ATtiny4?
2 of 4 people found this review helpful
Was this review helpful to you?   Yes   No
    • Q
    • can i program attimy 13 a with this programmer

      asked by somasekhar on August 23, 2018
    • A
    • Attiny13 will support this programmer.

    • Q
    • Can AVR ISP programmer be used to program ATTiny167?

      asked by Ramkumar on September 17, 2016
    • A
    • If you have the ATtiny 167 configuration file in your PC in order to check whether AVR ISP programmer can be used to program the device, type avrdude -p ? in the command prompt.It will list out all the devices that are supported by AVR ISP programmer.

      Kindly check the Rhydolabz wiki link given below.

      http://www.rhydolabz.com/wiki/?p=14008

    • Q
    • For this product how can we use a 6-pin target. Please clarify.

      asked by Nilanjan Mandal on February 28, 2017
    • A
    • Thank you very much for your valuable inquiry.
      Please go through the link given below. It is explained how 6 pin target is connected.

      https://learn.sparkfun.com/tutorials/pocket-avr-programmer-hookup-guide

    • Q
    • Will AVR ISP Programmer - USB work with ATMEGA 32A?

      asked by Julien on May 31, 2017
    • A
    • AVR ISP Programmer - USB cannot be used to program ATMEGA 32A controller.

Ask a question about AVR ISP Programmer - USB - rhydoLABZ

Report issue about the AVR ISP Programmer - USB - rhydoLABZ



Ask a question about the AVR ISP Programmer - USB - rhydoLABZ

Report issue about the AVR ISP Programmer - USB - rhydoLABZ



Request price match for the AVR ISP Programmer - USB - rhydoLABZ

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

AVR ISP Programmer - USB - rhydoLABZ