Bus Pirate v3.6a is a troubleshooting tool that communicates between a PC and any embedded device over 1-wire, 2-wire, 3-wire, UART, I2C, SPI, and HD44780 LCD protocols all at voltages from 0-5.5V DC. Working with the Bus Pirate is simple and effective type commands into a terminal on your computer..
SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers. The Serial Basic uses the CH340G IC to quickly and easily convert seria..
SparkFun LiPo Charger Basic - Micro-USB is used to charge charge LiPo batteries. The SparkFun LiPo Charger charge 3.7V LiPo cells at a rate of 500mA. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. The board incorporates a charging circuit, status LED, connector for your battery..
The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-pin UART header that is compatible with other SparkFun breakout boards. This breakout has a microUSB connector and other support circuitry to get the IC ..
USB Mini-B Connector Breakout Board breaks out the VBUS, GND, D-, D+ and ID pins of a USB Mini-B connector. The VBUS and GND pins can be used to power your project from USB, whereas the D- and D+ pins give you access to the USB differential data signals. Each of these pins, along with the ID pin, ar..
USB type A to A male 4-pin cable comes in Black. It is USB 2.0 compliant. These reliable connector cables can be used to connect between PC's.
Features:
USB type A male to type A male
Supports the full 480-Mbps transmission speed of the USB 2.0 standard
Premium double-shielded cables
..
USB Type ‘A’ Female SMD connector. For use with any PCB that will be used with a Type A to Type A USB cable.
USB Connector Package:
1x USB Type ‘A’ Female SMD connector
USB Connector Resources:
Datasheet..
Description: The Stick Series quick start boards from rhydoLABZ are primarily intended to be used as a development system for 64-pin ARM Controllers (LPC2129/38/48), which can also be used as stand-alone devices. Over the last few years, the ARM architecture has become the most pervasive 32-bit..
Description: The Stick Series quick start boards from rhydoLABZ are primarily intended to be used as a development system for 64-pin ARM Controllers (LPC2129/38/48), which can also be used as stand-alone devices. Over the last few years, the ARM architecture has become the most pervasive 32-bit..
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.2 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program..
The USB Blaster Download Cable interfaces a USB port on a host computer to an Altera® FPGA mounted on a printed circuit board. The cable sends configuration data from the PC to a standard 10-pin header connected to the FPGA. You can use the USB Blaster cable to iteratively download configuration dat..
Description: This here is your standard A-microB USB cable, for USB 2.0. Perfect for connecting a PC to your NETduino, Arduino Leonardo, Raspberry Pi (among other things).
Features:
Works with USB 2.0
Available in standard Black color
Length: 1.2 Mtr
Package Includes:
1 ..
A lot of devices out can communicate over RS232 your new laptop isn’t one of them! Not just with laptops, many other devices often demands converters for RS232 serial. This USB to RS232 converter is probably the best solution on such situations.This, high quality, low cost, small, and easy to use, c..
Description:The all New AVR ATmega16 Development Board-Mini can be used to evaluate and demonstrate the capabilities of AVR ATmega16 microcontrollers. Since all I/O pins are broken out on Male and female Berg strips, it is very easy to use for development purpose as well. The board is designed for g..
Description: The all New AVR ATmega32 Development Board-Mini can be used to evaluate and demonstrate the capabilities of AVR ATmega32 microcontrollers. Since all I/O pins are broken out on Male and female Berg strips, it is very easy to use for development purpose as well. The board is designe..