This is newest revision of rhydoLABZ make USB to Serial Converter (FT232RL Breakout) board. It is a compact and ready to use board which performs USB to Serial TTL (5V and 3V3) and vice versa conversion. The board holds an FT232RL USB UART IC for conversion. This module process an ea..
Description: This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad.Now..
This is a breakout board for Sparkfun's right-angle, 24-pin ATX connector.
Pair this board with the ATX connector and a standard PC power supply
and you'll have 3.3V, 5V, and ±12VDC to supply to your project. Make
sure you ground the PS_ON pin to enable all of the outputs.
All outputs of t..
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pi..
Breakout Board for XBee Module is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it breadboard DIP friendly. We highly recommend using the f..
This is a breakout board for the RN-131C WiFly GSX module, an ultra-low power 802.11b/g transceiver. This board breaks out all pins of the RN-131C to two 17-pin 0.1" pitch headers. Board comes fully assembled and tested as pictured.The WiFly GSX module is a stand alone, embedded wireless 802.11 netw..