Description: RCA cables are super handy for moving analog signals around. This is a great way to connect a composite video capable device, like the Raspberry Pi, to a suitable display. They also come in handy if you want to hook up your old-school analog gaming consoles, you know it's always impossi..
PCB edge mount (Reverse Polarized) RP-SMA Female RF connector for 1mm thick PCB. Perfect for prototyping with RF ICs. This is a standard edge connector. The thickness between pins is (0.039 inches) so that it can slide sideways onto a PCB. The connector is smaller in dimension than RP-SMA Conn..
Description: Supports high-definition TV and enhance the signals of the high-definition TV. High-purity; fine stranded copper conductors enhance high-frequency response and with ultra low attenuation. Silver-content solder connections transmit low-level signals accurately.
Features:
Excel..
Description: This here is your standard A-microB USB cable, for USB 2.0. Perfect for connecting a PC to your NETduino, Arduino Leonardo, Raspberry Pi (among other things). Approximately 140cm long from end to end, its a little more compact than other classic long cable.
Features:
Work..
Description: Yes, the same connecting cable for any development board. Use these cables to interface any computer with a standard RS232 Serial port to any of our boards. Cable color and shape may vary slightly from image as our stock rotates.
Features:
DB9 cable for RS232 s..
The 4D Programming Cable is a USB to Serial-TTL UART converter cable. It incorporates the Silabs CP2102 USB to Serial UART bridge IC (as used in the uUSB-MB5 module) which handles all the USB signaling and protocols. The cable provides a fast and simple way to connect all of the 4D devices that requ..
Description: The pcDuino AV Kit from Sparkfun includes everything you need to get your LinkSprite pcDuino powered, networked and connected to an HDMI enabled TV or monitor. If you don’t happen to have all of these cables laying around, this is the easiest way to get up and running with your pcDuino...
Description: It is a good quality FRC (Flat Ribon Cable) male connector -20 Pin (2x10) having Latch to hold the female header .The pitch is 2.54mm (0.1").
Features:
Contact Resistance: 30mOhm @ DC 100 mA
Insulation Resistance: 1000Mohm @ DC500V
Current Rating: 1 Amp..
Description: It is a good quality FRC (Flat Ribon Cable) male connector (2x5) having Latch to hold the female header .The pitch is 2.54mm (0.1").
Features:
Contact Resistance: 30mOhm @ DC 100 mA
Insulation Resistance: 1000Mohm @ DC500V
Current Rating: 1 Amp
..
Description: Use these Female to Female cables to connect a serial printer to a 9-pin serial port, or transfer files from PC to PC via serial connection. Cable color and shape may vary slightly from image as our stock rotates. Designed to provide a reliable and long-lasting connection.
Feat..
Description: This is a translucent silicon rubber button pad with 16 buttons.
Each button has a hole underneath that accepts either a 3mm or 5mm
standard LED. The idea is that you can create a button interface of your
choice with the ability to display simple colors under each button.
Mainly..
Description: Passive Power Over Ethernet Cable is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. At the same time it's compatible with most devices available on the market. Passive PoE`s range i..
Description: PCB Edge Mountable - SMA-Female RF connector for 1.6mm Thick PCB. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA- Male type antennas.
Package I..
Description: This is a 12" servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics Z s..
Description: This is a 12" servo cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Female connector on one end goes to controller and the female connector on the other mates with male pins commonly found on a controller board (such..