Description: The all New LPC2129 Development Board-Mini can be used to evaluate and demonstrate the capabilities of NXP LPC2129 microcontroller and CAN Communication. Since all I/O pins are broken out on Male and female Berg strips, it is very easy to use for development purpose as well. The board i..
Description: We live in exciting times where we can create masterpieces with the Arduino and marvels with the Raspberry Pi. Where we can use technology as a canvas to create things that amaze and amuse our friends and family. Wouldn't it be great if we could take the same technology that has been t..
Description: The All New Revised QSB (QuickStart Board) for PIC18F4520 is a Low Cost Development Board that can be used to quickly evaluate and demonstrate the capabilities of 40 PIN PIC18F4520 microcontroller. The board is designed to work as a header board with access to all pins for external conn..
Description: The All New Revised QSB (QuickStart Board) for PIC16F877A is a Low Cost Development Board that can be used to quickly evaluate and demonstrate the capabilities of 40 PIN PIC series of microcontrollers from Microchip, like PIC16F877A/PIC16F887 microcontrollers. The board is designed to w..
The D24V5Fx family of buck (step-down) voltage regulators generates lower output voltages from input voltages as high as 36 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 80% to 93%, which is much more e..
Description: The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy++ breaks out all of the IO available on the AT90USB1286 to breadboard-friendly 0.1" spaced headers so you can hook up a load of peripherals.The Teensy++ comes pre-flashed ..
This is high quality Single Pole - Double Throw (SPDT) sealed 12V Sugar Cube relays. Use them to switch high voltage (240AC), and/or high current devices(7A).
This relay's coil is rated up to 14V, with a minimum switching voltage of 10V. The contacts are rated up to 7A @250VAC and 7A @24VDC...
WIZ120SR is an embedded module based on WIZnet W5100 & ARM Cortex-M3. WIZ120SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment. It sup..
This is 12mm x 12mm thru hole tactile switch offers reliable dome contact technology with strong tactile/audible feedback. Its multiple operating force options allows it to be applied to many industries: telecommunications, consumer electronics, medical, testing/instrumentation, computer/servers/per..
Description: A basic 12 button keypad for user input. The buttons are setup in a matrix format. This allows a microcontroller to 'scan' the 7 output pins to see which of the 12 buttons is being pressed. Check the examples below for correct pin-outs and such.
Package Includes:
1x Keyp..
Description: This is a 12" servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics Z s..
Description: This is a 12" servo cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Female connector on one end goes to controller and the female connector on the other mates with male pins commonly found on a controller board (such..
Relay SPDT Sealed are high quality Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage, and/or high current devices.
This relay's coil is rated up to 12V, with a minimum switching voltage of 5V. The contacts are rated up to 5A (@250VAC, 30VDC).
Relay SPDT S..
Description: This is a breakout board for the ATmega128RFA1. It includes an on board 3.3V regulator, chip antenna, and DC input jack. The board can be powered with either a 5V or a 9V wall wart. ATmega128RFA1 is an IEEE 802.15.4 compliant single-chip, combining the industry- leading AVR microcontrol..
Description: This 12-inch (300-mm), flat cable can be used to extend the leads of many common RC hobby servos. It has 22-AWG wires, and both the male and female cable ends are compatible with both JR- and Futaba-style connectors, allowing it to work in either system or as an adapter between systems...