Model: RAS-3402
Brand: Waveshare
This is a PWM controlled Fan HAT, which is designed for Raspberry Pi, I2C Bus, PCA9685 driver, it can be used as a temperature monitor as well.
Features:
PCA9685 PWM driver as the fan controller, powerful driving capability, auto PWM adjustment
0.91" OLED, 128x32 pixels, displays board temperat..
Rs 699.00 Rs 1,199.00
Model: INT-3031
Brand: Waveshare
Industrial grade isolated RS232 TO RS485 asynchronous bi-directional converter
Embedded TVS (Transient Voltage Suppressor) and lightning-proof diode
Features:
Compatible with RS232/RS485 standard, converting the RS232 signal into balanced differential RS485 signal
Stable transmission..
Rs 1,299.00
Model: DIS-3378
Brand: Waveshare
240×240, General 1.54inch LCD Display Module embedded ST7789 driver, using SPI bus Comes with examples for Raspberry Pi, Arduino, STM32, etc.
Features at a glance:
240×240 resolution, 65K RGB colors, clear and colorful displaying effect
SPI interface, minimizes required IO pins,..
Rs 449.00 Rs 599.00
Model: DIS-3375
Brand: Waveshare
This is an NFC-powered 2.9inch e-Paper Module, with 296x128 resolution. Users can transmit data from smartphone or NFC reader to e-Paper and refresh by NFC.
Features:
No backlight required, e-Paper keep displaying the last content for a long time without power
No power adapter required
..
Rs 2,499.00 Rs 4,199.00
Model: DEV-3360
Brand: Waveshare
This is an NFC development kit based on ST25R3911B, with STM32F103R controller, OLED display, user buttons, and common used interfaces. It is your ideal choice for learning and developing NFC applications.
Multiple NFC protocols are supported by the kit, with up to 1.4w output power, and low-power ..
Rs 2,749.00
Model: DEV-3356
Brand: Waveshare
This low power audio module is based on WM8960, supports stereo encoding/decoding, supports sound recording, what's more, it can directly drive speakers to play music.
Features:
Integrates high-quality MEMS silicon Mic, supports sound recording
Onboard standard 3.5mm 4-segment ear..
Rs 1,049.00
Model: INT-3029
Brand: Waveshare
The RS232/485 TO ETH is an industrial RS232/RS485 to Ethernet converter, which allows bi-directional transparent data transmission between RS232/RS485 and RJ45 port Ethernet, even at the same time, it can be configured via webpage.
Features:
M4 series 32-bit ARM processor with up ..
Rs 3,299.00
Model: INT-3028
Brand: Waveshare
The RS485 TO ETH module provides an easy way to communicate between RS485 and RJ45 port Ethernet, it can be configured via webpage.
Features:
M0 series 32-bit ARM processor, fast speed, high efficiency
10/100M Auto-MDI/MDIX ethernet interface, regardless of cross-over or straigh..
Rs 1,499.00 Rs 1,999.00
Model: INT-3027
Brand: Waveshare
This is an industrial USB to RS485 converter with original FT232RL inside. It features embedded protection circuits such as lightning-proof, resettable fuse, ESD protection, and TVS diode, etc. It's pretty small in size.
The USB TO RS485 is very easy to use, allows automatic transceiv..
Rs 1,249.00
Model: MIS-3250
Brand: Waveshare
This is an industrial 8-ch relay module controlled via RS485 bus, utilizing Modbus RTU protocol. It features embedded protection circuits such as power isolation, ADI magnetical isolation, and TVS diode, etc. It also comes with an ABS enclosure.
The Modbus RTU Relay is very easy to use. Due..
Rs 2,399.00
Model: RAS-3394
Brand: Waveshare
This is a 4-ch current and power monitor HAT designed for Raspberry Pi. Via the I2C or SMBus interface, it is easy to monitor each channel's current, voltage, and power consumption, as well as the voltage between both sides of the sampling resistor.
Features:
Standard Raspberry Pi 40PIN GP..
Rs 2,585.00
Model: DEV-3355
Brand: Waveshare
This is an NFC development kit based on ST25R3911B, with STM32F103R controller, OLED display, user buttons, and common used interfaces. It is your ideal choice for learning and developing NFC applications.
Multiple NFC protocols are supported by the kit, with up to 1.4w output power, and low-p..
Rs 999.00 Rs 1,599.00
Model: SEN-3722
Brand: Waveshare
This is a small 1D/2D codes reader, by using the intelligent image recognition algorithm, it will decode the barcode or 2D code on paper or screen, fast and accurately.
Through the onboard USB and UART interface, it can be directly plugged into a computer, or be easily integrated to kinds of devi..
Rs 2,999.00
Model: RAS-3392
Brand: Waveshare
The Sense HAT (B) is specially designed for Raspberry Pi, integrates multi powerful sensors such as gyroscope, accelerometer, magnetometer, barometer, temperature and humidity sensor, etc. It is communicated via I2C interface, and allows to connect more external sensors if you need.
Trying to mak..
Rs 2,549.00
Model: RAS-3391
Brand: Waveshare
Needless to say, the Raspberry Pi is powerful enough in most cases, yet it's not that good at providing precise PWM output. You may have tried to control a robotic arm or a hexapod walker by using the Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. No..
Rs 499.00 Rs 699.00