This is a high quality protoboard. It gives you 7x9cm of building space for through-hole components with 2.54mm pitch. The pads are double sided. A total of 806 holes are available on board, 26 in row and 31 such rows.
Specifications of Double Side ProtoBoard (7x9cm):
Base Material : FR - 4..
This is a 2.4GHz Transceiver, communicate using SPI and has 250kbps, 1Mbps and 2Mbps on air data rate. It employs an nRF24L01+, a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific and Medical) band. With peak RX/TX currents lower than 14mA, a..
Description: Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link. This WiFi dongle is supported by the Bone's Angstrom/Debian installation that comes with each Bone as well as Raspbian and just about any other modern Pi operating system..
This is a 0.96 inch blue OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128x64. The package includes display board,display, 7 pin male header presoldered to board.
OLED (Organic Light-Emitting Diode) is a self..
Description: If you want to make some fun embedded computer projects with your Pi, from your very first project, you would have wanted to breakout the Pi pins. This Extension Board will help you on this, it breaks out all those tasty power, GPIO, I2C and SPI pins from the 26 pin header onto a breadb..
This Weight Sensor amplifier is based on HX711, which consists of an amplifier and a precision 24-bit analog-to-digital convertor designed for weigh scale and industrial control applications to interface directly with a bridge sensor. The HX711 uses a two wire interface (Clock and Data) for communic..
Description: This TFT LCD is designed for RPI, you can design it for many other things. This play and plug is easy to use and comes handy for any of your Raspberry pi projects. Simply connect the module to your Piand you are ready to go. Compatible with Raspberry Model B+, Pi 2 and Pi 3.
Features..
Description: Simple shrouded 10-pin connector. Good for preventing cable connection mishaps. Use for programming, data, power, or any other kind of connection. 2x5 pins on 2MM centers.
Features:
Gender: Male
Type: Box header
Pitch: 2.0mm
Body Orientation: Straight
Type of Row..
Description: The Mini Gmouse Vk-162 GPS Receiver(USB) is a low cost High sensitivity GPS Receiver + Internal Antenna with USB connector. It is a Stand alone GPS receiver providing a solution with high position and speed accuracy performances as well as high sensitivity and tracking capabilities in ..
Description: This is a breakout board for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. It’s based on piezo-resistive technology for high accuracy, ruggednes..
Description: These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 132x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is r..
Anti-Static Tweezer (ESD-13) is designed to meet the requirements of the electronics and precision engineering industries. Anti-static tweezer ESD-13 features anti-magnetic and anti-acid properties. The tweezer is made of non-corrosive stainless steel, have a pointed and hard tip.
Anti-Static Tweez..
Anti-Static Tweezer (ESD-10) is designed to meet the requirements of the electronics and precision engineering industries. Anti-static tweezer ESD-10 features anti-magnetic and anti-acid properties. The tweezer is made of non-corrosive stainless steel, have a pointed and hard tip.
Anti Static Tweez..
Anti-Static Tweezer - Fine Tip Curved (ESD-15) is designed to meet the requirements of the electronics and precision engineering industries. Anti-static tweezer ESD-15 features anti-magnetic and anti-acid properties. The tweezer is made of non-corrosive stainless steel, have a pointed and hard tip.
..
Anti-Static Tweezer (ESD-12) is designed to meet the requirements of the electronics and precision engineering industries. Anti-static tweezer ESD-12 features anti-magnetic and anti-acid properties. The tweezer is made of non-corrosive stainless steel, have a pointed and hard tip.
Anti Static Tweez..