These are very small surface mount quartz crystals used where size is a concern. 20MHz is ideal for use with microcontrollers.
Note: This product has a minimum quantity restriction (5nos) for order.
Features:
Termination Style: SMD/SMT
Package / Case: HC-49/US-SM
Frequency: 20 MHz
..
This is a general purpose surface mount Aluminum Electrolytic capacitor of 220uf capacitance with rated voltage 16V.
Note: This product has a minimum quantity restriction (5nos) for order.
Features:
Capacitance: 220μF
Rated Voltage: 16V
Package Type: Surface Mount
Operating Temperature: -40o..
This is a Case A SMD Tantalum Capacitor of 10uF capacitance with rated voltage 16V.
Note: This product has a minimum quantity restriction (5nos) for order.
Specifications:
Capacitance: 10 uF
Voltage Rating: 16 V
Leakage Current: 1.6 uA
Tolerance: 10 %
Case Code: A Case
O..
A very powerful 5mW red laser point. Fun, but don’t point in anyone’s eyes. These units have the power wired in such a way that the unit turns on when power is applied. Increase the current flow and things starts to get very bright.
Cautions: Class III, avoid direct eye exposure to beams
5mW Laser..
20x2 Character LCD - Black on Green is a 20 characters wide, 2 rows character LCD module. It utilizes industry-standard HD44780 compatible controller, works in 4/8-bit parallel interface. Display area is LED back-lit in yellow green color.
This alphanumerics display can be easily interfaced with an..
Anti Static Tweezer , designed to meet the requirements of the electronics and precision engineering industries. Anti-static tweezer ESD-16 features anti-magnetic and anti-acid properties. The tweezer is made of non-corrosive stainless steel, have a pointed and hard tip.
Anti Static Tweezer Featur..
Anti Static Tweezer with Straight Super Fine Tip (ESD-14) is designed to meet the requirements of the electronics and precision engineering industries. Anti-static tweezer ESD-14 features anti-magnetic and anti-acid properties. The tweezer is made of non-corrosive stainless steel, have a super fine..
USB Type ‘A’ Female SMD connector. For use with any PCB that will be used with a Type A to Type A USB cable.
USB Connector Package:
1x USB Type ‘A’ Female SMD connector
USB Connector Resources:
Datasheet..
150W DC-DC Boost Converter module allows you to step up an input voltage as low as 10V and set the output to 12V-35V. The output voltage will be higher than the input voltage. The boost converter design is based on popular Texas Instrument’s UC3844 current mode PWM controller chip.
Consider this ..
24MHz 8 Channel Logic Analyzer (China) is an electronic instrument which displays signals in a digital circuit. A logic analyzer displays the captured data into timing diagrams, protocol decodes for easy troubleshooting and development. This one is a small USB-based logic analyzer. It has 8 channels..
Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side you use.
This Peltier works very well as long as you remove..
Digital Capacitive Touch Switch Module is based on TTP223B. Normally,it outputs low and keeps at low power state. When a touch is sensed on the circular marked region, it outputs high and switch to the quick response state. When not being touched for 12 seconds, it switches to low power state again...
TCS3200 Color Recognition Sensor is a small module designed with TCS3200 Color Sensor that can convert light intensity to frequency. In addition to the TAOS TCS3200 RGB sensor chip, the module also features 4 white LEDs. The TCS3200 can detect and measure a nearly limitless range of visible colors. ..
Black / White Line Follower Sensor is an add-on for, a must have add-on, for any project with line tracking. It gives your robot the ability to detect lines, or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measuring the amount of reflected infrar..
IR Infrared Obstacle Avoidance Sensor Module has a pair of infrared transmitting and receiving tubes. When the transmitted light waves are reflected back, the reflected IR waves will be received by the receiver tube. The onboard comparator circuitry does the processing and the green indicator LED co..