4 channel thermistor temperature sensor module is very sensitive to ambient temperature. It is generally used to detect the temperature of the surrounding environment. Through potentiometer adjustment, it is possible to change the temperature detection threshold. DO output can be directly connected ..
A2212 KV1000 Brushless Motor is used for powering up RC quadcopter. It is built with high quality bearings and stators. It has high efficiency and constant power to drive the propellers for a stable flight. Patented balancing technology ensures a high performance. Crafted with solid metal case, it i..
This 20 character by 4 line display has a very clear and high contrast white text upon a blue background/backlight. It also includes a serial I2C/IIC adaptor board pre-soldered to the back of the LCD. This means it can be controlled with just 2 I2C serial data pins (SDA & SCL) and so requires far le..
The tilt sensor is a component (switch) that can detect the orientation of an object (upright or not). It is equivalent to a pushbutton activated through its physical orientation. It contains a metallic ball inside that will commute the two pins of the device from CLOSED to OPEN if the sensor excee..
Flame Sensor - 5mm IR Diode can work as a fire detection flame sensor module, fire source detection modules. This Flame Sensor can be used to detect fire source or other light sources of the wave length in the range of 760nm - 1100 nm. It is based on the YG1006 sensor which is a high speed and high ..
This is a 0.96 inch Blue & Yellow OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. This 0.96" OLED Bicolor Display Module is a combination of 128x16 Yellow OLED followed by 128x48 Blue OLED, thus brings out a pixel resolution of 128x64 as a ..
This is a 0.96 inch blue OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128x64. The package includes display board,display, 6 pin male header presoldered to board.
OLED (Organic Light-Emitting Diode) is a self..
0.96 inch white OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128x64 . The package includes display board,display, 6 pin male header presoldered to board.
OLED (Organic Light-Emitting Diode) is a self light-e..
Infra-Red Receiver module as used in TVs and other appliances. Great for use with our mini IR remote control. Sheilded in a metal jacket. Strong resistance to electromagnet interference, high immunity against ambient light.
Note: For better sensitivity, keep hands off the sensor module.
Featur..
L9110 Motor Control Driver is a dual channel motor driver controller board, which can control two DC motors, or a single four-wire two-phase stepper motor. The circuit uses the L9110 (HG7881) integrated circuits (IC), which consist of H-Bridge drivers.
The L9110S IC has TTL / CMOS compatible I/O,..
This 16 character by 2 line display has a very clear and high contrast white text upon a blue background/backlight. It also includes a serial I2C/IIC adaptor board pre-soldered to the back of the LCD. This means it can be controlled with just 2 I2C serial data pins (SDA & SCL) and so requires far le..
16x2 Character LCD - Black on Green is a 16 characters wide, 2 rows character LCD module. It utilizes industry-standard controller, works in 4/8-bit parallel interface. Display area is LED back-lit in yellow color.
This alphanumerics display can be easily interfaced with any host controller such ..
4-Channel Solid-State Relay is some what similar to that of a mechanical relay & the difference is that, there is no moving contact in a Solid-State Relay. Here we make use of Phototrriac coupler to turn it ON and OFF. It finds its application in AC circuits as a TRIAC has got only limited aplic..
1-Channel Solid-State Relay is some what similar to that of a mechanical relay & the difference is that, there is no moving contact in a Solid-State Relay. Here we make use of Phototrriac coupler to turn it ON and OFF. It finds its application in AC circuits as a TRIAC has got only limited aplic..
MP1584 DC-DC 3A Step Down Module converts input voltage between 4.5V and 28V into a smaller voltage between 0.8V and 18V, capable of driving a 3A load with excellent line and load regulation.This makes the fully compatible with setups from 2-6s. Simply turn the small screw to adjust the voltage.
..