Description: Single Shaft Plastic Gear Motor - BO-1series gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. Small shaft with matching wheels give optimized design for your application or robot. Mounting holes on the body & light weight makes it su..
This is a simple three track magnetic card reader with serial output. This reader connects to your computer with a DB9 for RS232 serial and a PS/2 connector for power The Reader outputs a 9600bps 8N1 ASCII serial stream. Plug the reader into a serial port (or USB to serial converter), swipe your fre..
These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board holes. Solder them just like you would normal wire..
Description: The Gertboard is an add-on GPIO expansion and experimenter board for Raspberry Pi. It comes with a large variety of components, including buttons, LEDs, A/D and D/A converters, a motor controller, and an Atmel ATmega328 AVR microcontroller which you can program using the standard Arduin..
Modular Plastic Storage Box - Medium (4 pack), if you keep this up your workbench is going to turn into a galaxy of small parts with no place for anything and nothing in its place. Okay, so maybe that just happens to some of us, but everyone could use a little organization and that's exactly what th..
Modular Plastic Storage Box - Small (10 pack), if you keep this up your workbench is going to turn into a galaxy of small parts with no place for anything and nothing in its place. Okay, so maybe that just happens to some of us, but everyone could use a little organization and that's exactly what th..
Ever you thought , protecting your doors with RFID or Password access control devices? , if yes this is for you , a 12V Electro Magnetic lock which requires less than 500mA current to hold it. Once it is energized, it will lock the doors and it is very strong . Included all necessary accessories in ..
Description: Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn't know how? Well, here's how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the 3/4" threaded inlet and it will interrupt the flow until 12V is applied to th..
ArduCopter Arms made from light weight aluminium. These arms are 21.5cm long and have Half Holes.3mm holes on both ends and Cables out hole at center end.
Features:
Made from light weight aluminium
Arm length : 21.5cm
3mm holes on both ends
Hole at center for taking cables out
Package i..
Description: This is a very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FS..
Description: Piezo elements come in handy when you need to detect vibration or a knock. You can use these for tap or knock sensors pretty easily by reading the voltage on the output. They can also be used for a very small audio transducer such as a buzzer.
Package includes:
1 x Piezo Element
..
Description: This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the F..
Description: Unsoldered iPod Connector, Comes in 7 Pieces. Easy to Assemble.
Specifications:
Current Rating: 1.0A
Wire :26 Gauge
Operating Temperature :-30C — +60C (-22F — 140F)
Storage Temperature :-40C — +85C (-40F — 185F)
Insulator resistance :1000M ohms min at 250 VDC
Maximum voltage ..
This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in, pop-out feature that makes changing the battery easy. The feet of the holder have a small hole that allow it to be sewn without modification.
Package includes:
1 x Coin Cell Holder - Sewable SMD..
Description: Sometimes you want a small input and a single button just won't cut it. A 5-way tactile switch allows for a joystick-like interface in a very small package. These are surface mount, but easily soldered.
Package includes:
1 x Tactile switch
Documents:
Datasheet..