Model: IC-3289
Brand: Unknown
TXB0106PWR is a 6-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65V to 5.5 V. This allows for univ..
Rs 149.00
Model: SEN-2545
Brand: Unknown
Description: Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse signal. This one is suitable to detect flow..
Rs 229.00
Model: CON-2377
Brand: Unknown
These single-pin housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10. Just pick the housing for the co..
Rs 1.00
Model: COM-2428
Brand: Unknown
Description: These are very small surface mount quartz crystals used where size is a concern. 12MHz is ideal for use with microcontrollers that have built-in USB hardware.
Features:
Small 5x3.2mm footprint
Operating temperature: -40-85C
Frequency Tolerance: +/- 20ppm
22pF ..
Rs 10.00
Model: SEN-2614
Brand: Unknown
Description: Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse signal. This one is suitable to detect flow..
Rs 890.00
Model: SEN-2613
Brand: Unknown
Description:Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse signal. This one is suitable to detect flow ..
Rs 890.00
Model: TOL-2580
Brand: Unknown
Solder/Desolder Flux 10g has the purpose of flux is to facilitate the soldering process. One of the obstacles to a successful solder joint is an impurity at the site of the joint, for example, dirt, oil or oxidation.
Features of Solder/Desolder Flux 10g:
Facilitates quick and bright..
Rs 18.00
Model: MIS-2325
Brand: Unknown
The strap provides excellent grounding and hence safety to electronic components from damage due to static charges on personnel handling them.The elastic band is made of polyester and woven stainless steel/nickel fibers on interior surface. Each unit comes with a 2m coil grounding cord with a built-..
Rs 169.00
Model: COM-2394
Brand: Unknown
ElastoLite® is a fantastic line of flexible electroluminescent (EL) panels, inverters, and connectors that can be sewn into clothing and used in a multitude of other lighting applications. The biggest question received with these EL panels is, “Where do I start?” ElastoLite® Kit, is an all in one st..
Rs 4,489.00
Model: MIS-2323
Brand: Unknown
Even though the Tron movies have been out for a while, electro-luminescence is still the coolest thing since sliced bread. The only downer is carrying around a battery pack and bulky external inverter. Good news, we’ve found a slim battery-powered inverter for your next small EL project! This little..
Rs 499.00
Model: MIS-2521
Brand: Unknown
Description: Who doesn’t love the soft glow of electro-luminescence? This EL tape is a flexible plastic ribbon which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It’s a lot like the ever-popular EL wire except, well, it’s a ribbon.
These ca..
Rs 729.00
Model: COM-2391
Brand: Unknown
EL inverters allow you to drive EL wires. This particular EL inverter accepts 3V input and outputs 110VAC to drive EL wire. The wires both terminated with JST PH connectors. These are designed to plug directly into our EL Escudo or EL Sequencer. You can drive EL wires with them directly, but you may..
Rs 999.00
Model: COM-2575
Brand: Unknown
Description: These circular LED displays are a lot of fun. Essentially, these are what you would get if you could ‘wrap’ one of our LED bargraphs around a circle. They consist of 16 blue LEDs arranged so that each quarter of the circle has a common ground and four anode pins, resulting in 20 pins to..
Rs 969.00
Model: SEN-2399
Brand: Unknown
Description: Are you trying to make a quick dime from electronics? Why limit yourself to dimes? This coin acceptor will take up to 6 different kinds of coin! Whether you're building your own arcade cabinet or just charging admission to your house, this programmable coin acceptor makes it easy to mon..
Rs 3,699.00
Model: MIS-2265
Brand: Unknown
When soldering small surface-mount (SMD/SMT) components, one thing you'll need is a good pair of tweezers. These tweezers are a great pair of every-day tweezers. They're anti-static, anti-magnetic and made of hard stainless steel. The tips are fine and pointy to pick up any size component.
Features..
Rs 289.00