DORJI cooperates with its strategic partner in antenna design and production and provides smart SMA antennas with different length and degree in order to meet the rigid requirements from various applications. According to the degree, antennas can be divided into 90 degrees (bent) antenna and 180 deg..
DZM5168M-R1 is a type of low energy Zigbee router module based on RFIC JN5168 from NXP Semiconductors, that provides a fully integrated solution for applications using the IEEE802.15.4 standard in the 2.4 - 2.5GHz ISM frequency band [1], including Zigbee PRO, ZigBee Smart Energy, ZigBee LightLink, R..
Description: DZM5168M-C1 is a type of low energy Zigbee coordinator module based on RFIC JN5168 from NXP Semiconductors, that provides a fully integrated solution for applications using the IEEE802.15.4 standard in the 2.4 - 2.5GHz ISM frequency band [1], including Zigbee PRO, ZigBee Smart Energy, Z..
DACx3 series USB converter boards are designed for testing DRF4432D20I series of modules. DAC03 board is USB-to-TTL converter board. DAC13 is USB-to-RS232 converter board and DAC23 is USB-to-RS485 converter board. Users need to install USB driver first before using them. The driver can be downloaded..
Description: DSTH01 is a type of digital relative humidity and temperature sensor module which integrates temperature and humidity sensor elements, an analog-to-digital converter, signal processing,calibration data and an I2C host interface. Both the temperature and humidity sensors are ..
DRA887TX and DRA886RX are low cost ASK transmitter modules Pair which are based on RFIC which minimizes the board size and improve the stability against interferences. The transmitter modules work in very wide voltage range so they are very suitable for battery-driven applications. DRA886RX is a typ..
DRF1110N20-N is a low-cost sub-1 GHz wireless distributed network module (Loaded with Network Node Firmware) designed for operations in the MESH network applications such as AMR (Automatic Metering Reading), wireless sensor network. The module has one main channel and 1~16 auxiliary channels which c..
DRF1110N20-C is a low-cost sub-1 GHz wireless distributed network module (Loaded with Network Concentrator Firmware) designed for operations in the MESH network applications such as AMR (Automatic Metering Reading), wireless sensor network. The module has one main channel and 1~16 auxiliary channels..
DRF4432F27 is a type of low cost RF front-end transceiver module based on SI4431 from Silicon labs. It keeps all the advantages of RFIC SI4431 but simplifies the circuit design. The high sensitivity (-122dBm) and 27dBm output power make the module suitable for long range applications. DRF4432F27 mod..
DRF4431F13 is a type of low cost RF front-end transceiver module based on SI4431 from Silicon labs. It keeps all the advantages of RFIC SI4431 but simplifies the circuit design. The high sensitivity (-121dBm) and 13dBm output power make the module suitable for most short range applications.
DRF44..
Description: This antenna can be used to increase the range of your RF module. Works in the frequency of 433MHz. It has 90 Degree connector and is 45mm in length.
Specifications:
Part Type: antenna
Frequency Band: 433MHz
Antenna Interface: SMA Connector
Interface Gender: Male
Antenna ..
Description: This antenna can be used to increase the range of your RF module. Works in the frequency of 433MHz. It has 180 Degree connector and is 47mm in length.
Specifications:
Part Type: antenna
Frequency Band: 433MHz
Antenna Interface: SMA Connector
Interface Gender: Male
Antenna..
Description: This antenna can be used to increase the range of your RF module. Works in the frequency of 433MHz. It has 180 Degree connector and is 64mm in length.
Specifications:
Part Type: antenna
Frequency Band: 433MHz
Antenna Interface: SMA Connector
Connector Gender: Male
Anten..
Description: This antenna can be used to increase the range of your RF module. Works in the frequency of 433MHz. It has 180 Degree connector and is 100mm in length.
Specifications:
Part Type: antenna
Frequency Band: 433MHz
Antenna Interface: Male SMA Connector
Antenna Length: 1..
Description: This antenna can be used to increase the range of your RF module. Works in the frequency of 433MHz. It has 90 Degree connector and is 100mm in length.
Specifications:
Part Type: antenna
Frequency Band: 433MHz
Antenna Interface: Male SMA Connector
Antenna Length: 10..