Model: ROB-2220
Brand: Dagu
Description: The Explorer PCB provides your 2 motor Rover 5 chassis with a convenient interface to your controller. The PCB includes motor drivers with current sensing, 5V and 3.3V regulators, IR sensors on the corners. There are mounting holes for popular Arduino PCBs, breadboards and a pan&tilt ki..
Rs 2,533.00
Model: ROB-2219
Brand: Dagu
Description: This is the Dagu Mr. Basic Dual 2A Motor Controller Board. This simple motor controller PCB is designed specifically for Mr. Basic. Capable of working from 3.6V - 6V this PCB provides speed (PWM) and direction control of 2 motors with up to 2A per motor. Over half of the PCB is double s..
Rs 681.00
Model: ROB-2218
Brand: Dagu
Description: The DAGU Mini-Driver control board is an Arduino based miniature control board with a number of add-ons making it ideal for embedded projects, Beginners and Educators. The controller includes an ATMEGA8 (5V @ 16Mhz) with Arduino boot loader, Dual Channel DC motor controller (up to 2.5Am..
Rs 1,049.00
Model: ROB-2217
Brand: Dagu
Description: The Dagu ''Magician'' Dual 0.8A Robot Controller is a low cost, Arduino compatible controller that uses the ATmega8 processor and comes preloaded with the Arduino boot loader. The USB interface allows the controller to be easily programmed with the Arduino IDE and a USB cable. It is des..
Rs 2,409.00
Model: ROB-2216
Brand: Dagu
Description: The Red Back Spider controller from Dagu Electronics is an Arduino Mega compatible robot controller designed specifically for robots that use a large number of servos such as Humanoids, Hexapods and Serpents. All IO pins are laid out with power and ground for easy connection to servos ..
Rs 460.00
Model: ROB-2215
Brand: Dagu
Description: This is the "High Power Switch" from DAGU. Originally designed for the "Wild Thumper" robot chassis's it is a very versatile switch that can be used with any robot that draws more than the 2-3A that most small switches can handle.This switch will work with batteries from 6V to 24V with ..
Rs 1,299.00
Model: ROB-2214
Brand: Dagu
Description: This controller board is built by Dagu specifically for their robot
platforms. It essentially combines an Arduino development board with a
dual H-bridge motor driver all bolted down to an aluminum heatsink. The
heart of the board is an ATMega168 AVR microcontroller which comes
loade..
Rs 7,171.00
Model: ROB-2213
Brand: Dagu
Description: Each channel is rated for 4A of stall current and each channel has its own current monitoring circuit. Low resistance FET "H" bridges ensure high efficiency and good motor torque. Built in control logic allows each motor to be controlled by 2 pins. One pin for speed and one for direc..
Rs 1,449.00
Model: ROB-2212
Brand: Dagu
Description: This is a great platform to experience the joy of building an entire robotic platform from the nuts and bolts.Once the platform is assembled it has 2 DC motors and a battery case to power this little toy and drive it around.The Dagu Mr. Basic Mobile Robotic Platform is a simple 4WD robo..
Rs 1,699.00
Model: ROB-2211
Brand: Dagu
Description: The 12DOF Hexapod robot chassis from DAGU is a simple, low cost robot chassis designed for students and novices.Hexapod's are a popular robot design but they usually tend to be either 3 servos or 18 servos.Although, this does not give the same range of motion as 3 DOF legs, you can stil..
Rs 6,455.00
Model: ROB-2210
Brand: Dagu
Description: Introducing the Dagu ''Playful Puppy'' Quadruped Robot Kit. This kit comes with all parts except batteries. The controller comes with an ATmega8 but this is easily upgradeable if required. The sample code provided allows the puppy to sit, shake hands, lie down, beg and walk on it's hind..
Rs 9,600.00
Model: ROB-2209
Brand: Dagu
Description: This 4WD Chassis is simple yet versatile robot chassis designed specifically for students and hobbyist. Featuring large size chassis plates cut from acrylic and designed with numerous holes and mounting points, providing plenty of space to carry a PCB board and any additional components..
Rs 1,799.00
Model: ROB-2208
Brand: Dagu
Description: The Magician Chassis is our latest robot platform from Dagu. It features two gearmotors with 65mm wheels and a rear caster. The chassis plates are cut from acrylic with a wide variety of mounting holes for sensors, controllers, power, etc. Simply bolt the two pre-cut platforms together,..
Rs 1,699.00
Model: ROB-2207
Brand: Dagu
Description: Rover 5 is a unique and powerful tracked chassis produced by DAGU. The Dagu Rover 5 2WD with encoder is a unique and powerful tracked chassis. Unlike conventional tracked chassis you can adjust the clearance. Stretchy rubber treads maintain tension as the clearance is changed.
The st..
Rs 4,041.00
Model: ROB-2206
Brand: Dagu
Description: The Dagu Rover 5 2WD without encoder is a unique and powerful tracked chassis. Unlike conventional tracked chassis you can adjust the clearance. Stretchy rubber treads maintain tension as the clearance is changed.
The standard chassis comes with two motors. The chassis is also availabl..
Rs 3,408.00