Model: ROB-2237
Brand: Dagu
Description: A gear is a rotating machine part which has cut teeth, that mesh with another toothed part in order to transmit torque.A gear is a toothed wheel designed to transmit torque to another gear or toothed component. The cut teeth are also called 'cogs'. Gears are one of the most important pa..
Rs 15.00
Model: ROB-2236
Brand: Dagu
Description: RW002 wheels are original wheels from Dagu.These wheels are one of the commonly used components in Robotics .RW002 match with Geared motor DG01D and DG02S.
Features:
65mm diameter (including rubber grip)
30mm wide (including motor connector)
25mm (wheel base)
Rubber wheel on plas..
Rs 299.00
Model: ROB-2235
Brand: Dagu
Description: The Dagu Polymorph - 1Kg is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simply heating in hot water until it is clear and then shaping by hand. When cool it becomes a nylon like white plastic. Polymo..
Rs 3,430.00
Model: ROB-2234
Brand: Dagu
Description: This is DAGU Continuous rotation servo with wheel.This includes continuous rotation servo with plastic gears and wheels with rubber tires: 38mm.
Servo Specifications:
Speed: 0.15sec/60deg
Angle Range: Clockwise/Anti-clockwise Continuous Rotation
Voltage: 4.8V - 6V
Torque: 3.5kg-c..
Rs 704.00
Model: ROB-2233
Brand: Dagu
Description: This is the Dagu Mini Pan and Tilt Kit. The kit includes original brackets, two miniature servos, a new bracket to hold the tilt servo and all the nuts, bolts etc.This pan/tilt kit has mounting holes to suit almost any range sensor.
Features:
Includes 2 miniature servos
Features mou..
Rs 963.00
Model: ROB-2232
Brand: Dagu
This is the Dagu Compound Infrared Sensor. This IR compound eye mounted on a pan/tilt assembly can be used by a robot to track movement within 200mm. Designed to fit LMR's universal sensor bracket, this sensor works by shinning IR light onto an object and then tracking the reflected IR. This sensor ..
Rs 528.00
Model: ROB-2231
Brand: Dagu
Description: The Dagu Nickel-Plated Brass Hubs Four Pack - 4mm Shaft is used to fit the all terrain wheels to the 4mm shafts of geared motors RS003A and RS003B. These brass fittings are nickel plated and come with stainless steel screws...
Rs 288.00
Model: ROB-2247
Brand: Dagu
Description: This is the Dagu 4WD Thumper Mobile Platform with 2DoF Arm (Gripper). The 4 wheel drive chassis is a smaller version of the Wild Thumper 6WD chassis, designed to excel at traversing rough terrain. It is a great platform for any robot that needs to perform tasks in a complex outdoor envi..
Rs 15,629.00
Model: ROB-2204
Brand: Dagu
This rugged, 4-wheel-drive chassis from Dagu Electronics is a smaller version of the Wild Thumper 4WD chassis with Encoders for 2 separate wheels . It is designed to excel at traversing rough terrain, making it a great platform for any robot that needs to perform tasks in a complex outdoor environme..
Rs 14,499.00
Model: ROB-2229
Brand: Dagu
Description: This cylindrical, 2.05" x 0.98" x 0.98" gear motor uses a brushed DC motor with extra-strong magnets and a 34:1 metal gearbox to deliver a lot of power in a relatively small package. These units have a 0.315"-long, 4 mm-diameter D-shaped output shaft. This is a powerful DC motor fitted ..
Rs 781.00
Model: ROB-2226
Brand: Dagu
Description: The miniature servo magnetic clutches from DAGU fit on your servo just like a standard servo horn. Unlike a standard servo horn, these clutches will slip when excessive force is applied to prevent your servo gears from breaking. Typical holding torque for the standard configuration i..
Rs 412.00
Model: ROB-2225
Brand: Dagu
Description: The simple encoder kit from DAGU consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors terminated with 150mm (6inch) cable and 3 pin female servo headers.The magnets have 4 north poles and 4 south poles and are strong enough that the sensor can detect the..
Rs 814.00
Model: ROB-2224
Brand: Dagu
Description: This Robot Arm from DAGU comes equipped with 2 DC motors coupled with 2 optical encoders and 3 End stop switches. The arm uses regular DC motors which, combined the Optical Encoders and Endstop switches, enables step by step control of the position and movement of the Arm.
This ki..
Rs 3,920.00
Model: ROB-2223
Brand: Dagu
The robotic claw can bring life to any project. Using just gears and the servo, gripping, grabbing and even clamping objects can be easily implemented into your project. It comes pre-assembled in a plastic bag. The claw gripper is made from 3mm thick aluminium, along with 6 servos.
Features:
6 s..
Rs 13,286.00
Model: ROB-2222
Brand: Dagu
The robotic claw can bring life to any project. Using just gears and the servo, gripping, grabbing and even clamping objects can be easily implemented into your project. Made from strong 3mm sheet aluminium this 2 degree of freedom robotic arm with a gripper allows mobile robots to pick up and move ..
Rs 4,166.00