Model: ROB-2472
Brand: Dagu
Are you ready to control all the
servos? You’d better be, because the Spider Controller from Dagu is
definitely ready. With a 3A switch mode power supply (capable of driving
up to 48 micro servos) and the ATmega1280 MCU, the Spider Controller is
perfect for ‘bots requiring a large ..
Rs 7,299.00
Model: ROB-2471
Brand: Dagu
This is the Multi-Chassis Rescue Platform, an easy to assemble and use robot chassis kit. The Multi-Chassis kit provides you with everything you need to give your robot a unique tank tread platform with plenty of room for expansion to add various sensors and controllers. What separates this Multi-Ch..
Rs 14,039.00
Out Of Stock
Model: ROB-2243
Brand: Dagu
Helping Third Hand Magnifier W/Magnifying Glass Tool is a classic 'third hand tool,' as seen on every desk! This tool is good for holding small PCBs and wires for tinning or soldering to parts.
Features of Helping Third Hand Magnifier W/Magnifying Glass Tool:
Every part can rotate arou..
Rs 579.00
Out Of Stock
Model: ROB-2245
Brand: Dagu
A battery holder is one or more compartments or chambers for holding a battery.A battery holder is either a plastic case with the shape of the housing molded as compartments that accepts batteries. Coiled spring wire or flat tabs that press against the battery terminals are the two most common metho..
Rs 62.00
Model: ROB-2241
Brand: Dagu
Description: This is Omni wheels from Dagu, similar to Mecanum wheels, are wheels with small discs around the circumference which are perpendicular to the rolling direction. The effect is that the wheel will roll with full force, but will also slide laterally with great ease.
Features:
Outer ..
Rs 652.00
Model: ROB-2238
Brand: Dagu
Description: This is Omni wheels from Dagu, similar to Mecanum wheels, are wheels with small discs around the circumference which are perpendicular to the rolling direction. The effect is that the wheel will roll with full force, but will also slide laterally with great ease.
Features:
Ou..
Rs 349.00
Model: ROB-2236
Brand: Dagu
Description: RW002 wheels are original wheels from Dagu.These wheels are one of the commonly used components in Robotics .RW002 match with Geared motor DG01D and DG02S.
Features:
65mm diameter (including rubber grip)
30mm wide (including motor connector)
25mm (wheel base)
Rubber wheel on plas..
Rs 299.00
Model: ROB-2234
Brand: Dagu
Description: This is DAGU Continuous rotation servo with wheel.This includes continuous rotation servo with plastic gears and wheels with rubber tires: 38mm.
Servo Specifications:
Speed: 0.15sec/60deg
Angle Range: Clockwise/Anti-clockwise Continuous Rotation
Voltage: 4.8V - 6V
Torque: 3.5kg-c..
Rs 704.00
Out Of Stock
Model: ROB-2233
Brand: Dagu
This is the Dagu Mini Pan and Tilt Kit. The kit includes original brackets, two miniature servos, a new bracket to hold the tilt servo and all the nuts, bolts etc.This pan/tilt kit has mounting holes to suit almost any range sensor.
Features:
Includes 2 miniature servos
Features mounting ho..
Rs 963.00
Model: ROB-2232
Brand: Dagu
This is the Dagu Compound Infrared Sensor. This IR compound eye mounted on a pan/tilt assembly can be used by a robot to track movement within 200mm. Designed to fit LMR's universal sensor bracket, this sensor works by shinning IR light onto an object and then tracking the reflected IR. This sensor ..
Rs 528.00
Model: ROB-2231
Brand: Dagu
Description: The Dagu Nickel-Plated Brass Hubs Four Pack - 4mm Shaft is used to fit the all terrain wheels to the 4mm shafts of geared motors RS003A and RS003B. These brass fittings are nickel plated and come with stainless steel screws...
Rs 288.00
Model: ROB-2226
Brand: Dagu
Description: The miniature servo magnetic clutches from DAGU fit on your servo just like a standard servo horn. Unlike a standard servo horn, these clutches will slip when excessive force is applied to prevent your servo gears from breaking. Typical holding torque for the standard configuratio..
Rs 412.00
Model: ROB-2225
Brand: Dagu
Description: The simple encoder kit from DAGU consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors terminated with 150mm (6inch) cable and 3 pin female servo headers.The magnets have 4 north poles and 4 south poles and are strong enough that the sensor can detect the..
Rs 814.00
Model: ROB-2224
Brand: Dagu
This Robot Arm from DAGU comes equipped with 2 DC motors coupled with 2 optical encoders and 3 End stop switches. The arm uses regular DC motors which, combined the Optical Encoders and Endstop switches, enables step by step control of the position and movement of the Arm.
This kit come..
Rs 3,920.00
Out Of Stock
Model: ROB-2223
Brand: Dagu
The robotic claw can bring life to any project. Using just gears and the servo, gripping, grabbing and even clamping objects can be easily implemented into your project. It comes pre-assembled in a plastic bag. The claw gripper is made from 3mm thick aluminium, along with 6 servos.
Features..
Rs 13,286.00