Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you’ll need one of these single port, RJ45 ethernet jacks with built in transformer (magnetics) and shielding.
Package Includes:
1x RJ45 Ethernet MagJack
Resources:
Datasheet..
Description: W5500 EVB is an evaluation board for W5500 chip based on the 32-bit ARM® Cortex™-M0 microcontroller. It is the easy way to develop internet connection for efficient and small embedded systems using W5500, WIZnet's hardwired TCP/IP embedded Ethernet controller. It has been designed to be..
WIZ550S2E is the serial to Ethernet module using W5500 & Cortex-M0 MCU. WIZ550SE is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment.If yo..
ioShield-A allows an Arduino board to connect to the Internet. It is based on the WIZ550io network module which uses WIZnet W5500 ethernet chip (W5500 Datasheet). The WIZnet W5500 provides a network (TCP/IP) stack capable of both TCP and UDP. It supports up to eight simultaneous socket connect..
WIZ550web is an embedded Web server module based on WIZnet W5500 hardwired TCP/IP chip. User can control & monitor the 16-configurable digital I/O and 4-ADC inputs on module via web pages. WIZnet provides firmware & web page examples for user to customize their own objective. &nbs..
Description: It is a evaluation board from WIZNET for testing wizFi220 wifi module .Since the Wifi module is SMD type, it will be difficult to develop a prototype , here this board come in to action. This EVB kit includes all the accesories including one WizFi Module soldered in breakout. The W..
Description: It is a evaluation board from WIZNET for testing wizFi210 wifi module .Since the Wifi module is SMD type, it will be difficult to develop a prototype , here this board come in to action. This EVB kit includes all the accesories including one WizFi Module soldered in breakout.   Â..
The W7200 is a new single chip microcontroller which integrates an ARM 32bit Cortex M3 with a hardwired TCP/IP core for high performance, easy development, and instant-on, reliable Ethernet capabilities. The W7200 incorporates 10BaseT/100BaseTX Ethernet PHY (physical layer), supporting half-duplex/f..
The W5200 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier Internet connection for embedded systems.W5200 suits users in need of stable Internet connectivity best, using a single chip to implement TCP/IP Stack, 10/100 Ethernet MAC and PHY. Hardwired TCP/IP stack supports ..
WIZ820IO is a plug-in internet-offload network module that includes WIZnet’s popular W5200 (TCP/IP hardwired chip + PHY), a mag-jack (RJ45 with transformer) and other peripheral logic. Housed in a very small form factor (23mm x 25mm) with two rows of 0.1”-spaced pins, WIZ820IO can be used as a ready..
WIZ120SR is an embedded module based on WIZnet W5100 & ARM Cortex-M3. WIZ120SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment. It sup..
The WIZ110SR is a gateway module that converts RS-232 protocol into TCP/IP. It enables remote gouging, managing and control of TCP/IP devices through an RS-232 serial interface. In other words, WIZ110SR is a protocol converter that transmits the data sent by serial equipment as TCP/IP data type and ..
Description: The WizFi630 is an High Performance 802.11b/g/n serial to WiFi module. The module provides serial UART interface which enables connection to any embedded design utilizing and 8/16/32-bit microcontroller via simple commands. The module supports Physical link rate up to 150Mbps, and is ..
Description: The WizFi220_CA is an ultra low power serial to WiFi module with power amplifier and onboard Chip Antenna. The module provides serial UART interface which enables connection to any embedded design utilizing and 8/16/32-bit microcontroller via simple commands. The module supports data ra..
Description: The WizFi210_CA is an ultra low power serial to WiFi module with Chip antenna. The module provides serial UART interface which enables connection to any embedded design utilizing and 8/16/32-bit microcontroller via simple commands. The module supports data rates up to 11 Mbps, and is co..