The 4DPi-32 is a 3.2” 320x240 Primary Display for the Raspberry Pi, which plugs directly on top of a Raspberry Pi and displays the primary output which is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel, enabling the 4DPi-32 to function with the Raspber..
4D Systems has designed and developed three plastic bezels to facilitate mounting and settling of units when using 4D Systems intelligent display modules. This is a 3.2" bezel for the popular uLCD-32PTU Intelligent Display and the new 4DPi-32 Raspberry Pi Display.
These bezels provide not onl..
The microUSB Programming Adapter (uUSB-PA5) is a USB to Serial-TTL UART bridge converter which is simple, cost effective, very small and easy to use.It uses a mini-B type USB connector to connect to your PC and is based on the FTDI FT232RQ USB to Serial Bridge IC from FTDI Chip.
It provides t..
The uOLED-96-G2 is a compact and cost effective display module using the latest state of the art Passive Matrix OLED (PMOLED) technology with an embedded GOLDELOX graphics processor that delivers 'stand-alone' functionality to any project. Powerful graphics, text, image, animation and countless more..
The uLCD-32PTU is a compact and cost effective Intelligent Display Module packed with plenty of features, ready to become the GUI for your target application, and capable of being an interface controller for a number of applications.
Embedded at the heart of the design is the PICASO processor, ..
The uLCD-24PTU is a compact and cost effective Intelligent Display Module packed with plenty of features, ready to become the GUI for your target application, and capable of being an interface controller for a number of applications.
Embedded at the heart of the design is the PICASO processor, wh..
The uLCD-220RD is a unique 1.38” Round LCD Intelligent Display Module powered by the 4D Systems’ DIABLO16 Graphics Processor. The uLCD-220RD is designed for applications such as gauges and instruments or for special applications such as robotics. Driving the display and peripherals is the DIABLO16 p..
Description: The uCAM-II (microCAM-II) is a highly integrated serial camera module which can be attached to any host system that requires a video camera or a JPEG compressed still camera for embedded imaging applications. The module uses a CMOS VGA colour sensor along with a JPEG compression chip th..
Embedded Audio Sound Module-SOMO-II is a tiny Audio-Sound module that can play MP3 audio files stored on a micro-SD card (or USB 2.0 Flash drive with extra components), such as voice and music. The SOMO-II features an on board 16bit MCU, specifically designed for hardware audio decoding.The SOMO-II ..
The 4DOLED-282815 is a 1.5" 128x128 pixel resolution 262K colour Passive Matrix OLED display. This OLED is the same display used in the microOLED range of modules. It allows a very cost effective means of adding a full colour small display to any product or your next microcontroller project.
..
Description: The Raspberry Pi Display Adapter is a simple adaptor board designed to provide a serial interface in a convienent form-factor, enabling the Raspberry Pi to connect to a majority of the 4D System display modules with a single 5 pin connection.
The 4D Serial Pi Adapter featur..
Description: This is the Development Platform for µOLED-XX-G1(SGC/GFX) Display Modules. The DEVBOARD-G1 is a compact and low-cost all in one development platform for the following display modules:4DGL Platform:µOLED-96-G1(GFX)µOLED-128-G1(GFX)µOLED-160-G1(GFX)Serial Platform:µOLED-96-G1(SGC)µ..
The 4DLCDM-32 is a complete display module solution using the popular 4DLCD-32T, a 3.2" TFT-LCD full colour display mounted on a carrier board. All of the display signals are brought out to a 2x15 pin dual row male header for easy access. Provision is also made for the backlight circuit on the board..
Description: The SOMO-14D is a tiny Audio-Sound module that can play back pre-stored audio files such as voice and music from a micro-SD memory card. The module supports 4-bit ADPCM audio files with sample rates from 6Khz up to 32Khz. By using the freely available software tool, any WAVE(.wav)..
The micro-DRIVE (uDRIVE-uSD-G1) is an extremely compact high performance Embedded Disk Drive module that can be easily added to any micro-controller design that requires a DOS compatible file and data storage system. Most micro-controllers have small and limited on-chip memory. For those application..