Description: This Class-2 Bluetooth Shield(RN42) made by rhydoLABZ simplifies the task of interfacing bluetooth with your Arduinos, Yes it is compatible with Arduino Due,which require 3V3 as interfacing voltage as well as all other Arduino boards and its clones. It is based on Arduino R3 layout with..
Description: This Class-1 Bluetooth Shield(RN41) made by rhydoLABZ simplifies the task of interfacing bluetooth with your Arduinos, Yes it is compatible with Arduino Due,which require 3V3 as interfacing voltage as well as other Arduino boards and its clones. It is based on Arduino R3 layout with ad..
With this GPS Shield populated with GPS module from rhydoLABZ you can add GPS functionality to your Arduino or you can receive the NMEA data on your PC/Laptop with a easiness of sliding a switch. A footprints for popular EM-406 GPS receiver , EM-408,PA4 GPS and EB-85A connectors are also made avail..
Description: BlueBEE-Gold is a compact XBEE Socket compatible Class-1 Bluetooth Module from rhydoLABZ. The module is designed as per the layout of famous XBEE module . Most of us will be having the boards or Arduino shields with XBEE socket built in, so it is not necessary to search for interfacing ..
Description: BlueBEE-Silver is a compact XBEE Socket compatible Class-2 Bluetooth Module from rhydoLABZ. The module is designed as per the layout of famous XBEE module. Most of us will be having the boards or Arduino shields with XBEE socket built in, so it is not necessary to search for interfacing..
Description: It is a high gain GPS Receiver (RS232) made with ultra small High gain third generation POT (Patch Antenna On Top) GPS module. Yes, there is no prior configurations required , just apply power (7V) by DC adpater or to RMC Connector from a battery or USB , your data (NMEA 0183) is ready..
Description: GPSBee is a high gain GPS Receiver. You can put the GPSBee Kit module into an existent shield, breakout, boards which is compatible with XBee standard sockets. It will be easy to test and use this module. The module is made with ultra small High gain third generation POT (Patch Antenna..
Description: BlueLINK-Silver is a compact Class-2 Bluetooth Module ( 5V & 3V Compatible) from rhydoLABZ. The module is built with Voltage regulator and level converter required to interface with 5V & 3V3 Micros alike . This version of the popular BlueLINK uses the RN-42 module which has a bit less r..
Description: BlueLINK-Gold is a compact Class-1 Bluetooth Module ( 5V & 3V Compatible) from rhydoLABZ. The module is built with Voltage regulator and level converter required to interface with 5V & 3V3 Micros alike. It is only having 7 pins (Standard 2.54mm bergstrip) VCC,GND,TX,RX,CTS,RTS and RESET..
Arduino basic Kit is a great raw parts re-fill for beginners as well as Professionals alike . It helps you to start the coding out of the box with supplied parts. No need to worry about the suitable cables ,wires etc. Included is a multitude of inputs, outputs to get your workbench back up to par.
..
Description: This XBee Shield made by rhydoLABZ simplifies the task of interfacing an XBee with your Arduino. It is compatible with Arduino boards and its clones boards with 3V3 as well as 5V interfacing voltage. It is based on Arduino R3 layout with additional pins. This board mates directly with ..
Description: This RFID reader-USB made by rhydoLABZ, reads EM4100 family transponder tags that are brought in proximity to the reader and output the unique tag identification number through serial port @9600 bps. It is working at 125Khz is suitable for most widely used RFID Cards some times called a..
Description: It is Proto Shield in kit form . It is very useful when you need to make your own stuff to stick on an Arduino-sized outline.The board is in unpopulated form with Switches, LEDs for simple I/O operation apart from resistors and capacitors. All I/O pins are available at male header pin..
Description: It is a fully assembled Proto Shield kit . It is very usefull when you need to make your own stuff to stick on an Arduino-sized outline.The board is populated with Switches ,LEDs for simple I/O operation apart from resistors and capacitors. All I/O pins are available at male header pin..
Description: It is a bare PCB for Proto Shield without any components . It is very usefull when you need to make your own stuff to stick on an Arduino-sized outline.The board is having options for Switches ,LEDs for simple I/O operation, lots of free pads , 5V pads ,ground pads and an option to stic..