Model: INT-2564
Brand: rhydoLABZ
This is the CP21202 Breakout Board. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus via a mini USB connector and will appear as a standard COM port.
Thes CP2102 doesn’t require any external oscillator, it ha..
Rs 379.00
Model: GPS-2509
Brand: rhydoLABZ
This is a great GPS module with External antenna option from rhydolabz.Simply provide 3.3v - 5VDC. The module has an impedance-matched, end-launch, standard SMA connector that will mate with our SMA GPS antennas listed in the site. The GPS module built with onboard voltage level converter and 3V vol..
Rs 1,700.00
Out Of Stock
Model: INT-2563
Brand: rhydoLABZ
This PC Keyboard Decoder is able to accept standard PC keyboard and decode the data into serial ASCII at 9600bps output. PC’s keyboards available nowadays are readily available at cheap cost and can be a cheap alternate to a keyboard on a microcontroller development system with lots of available key..
Rs 299.00
Model: QSB-2570
Brand: rhydoLABZ
AT89S52/AT89C51 Quick Start board is user friendly, multipurpose programmable board, for the beginner as well as a higher end user. This is a Low Cost Development Board that can be used to quickly evaluate and demonstrate the capabilities of Atmel AT89S52 / AT89C51 microcontroller. The board is desi..
Rs 725.00
Model: QSB-2571
Brand: rhydoLABZ
Description: AVR ATMEGA16 Quick Start Board board is user friendly, multipurpose programmable board, for the beginner as well as a higher end user. This is a Low Cost Development Board that can be used to quickly evaluate and demonstrate the capabilities of AVR ATMega16 microcontroller. The board is..
Rs 670.00
Model: QSB-2569
Brand: rhydoLABZ
Description:AVR ATmega32 Quick Start Board is user friendly, multipurpose programmable board, for the beginner as well as a higher end user. This is a Low Cost Development Board that can be used to quickly evaluate and demonstrate the capabilities of AVR ATMega32 microcontroller. The board is design..
Rs 699.00
Model: QSB-2568
Brand: rhydoLABZ
Description: The All New Revised QSB (Quick Start Board) for PIC is a Low Cost Development Board that can be used to quickly evaluate and demonstrate the capabilities of 40 pin PIC microcontrollers such as PIC16F877A, PIC16F887, PIC18F4520, PIC18F4550 and PIC18F4580. The board is designed to work as..
Rs 390.00
-33 %
Out Of Stock
Model: WRL-2509
Brand: rhydoLABZ
Description: HC-05 Bluelink is a compact Bluetooth Module ( 5V Serial TTL) from rhydoLABZ. The module comes with built in 3.3V Voltage regulator. It is only having 5pins (Standard 2.54mm bergstrip) VCC,GND,TX,RX and RESET. The module is factory configured in Transparent Mode. So there is no command ..
Rs 299.00 Rs 449.00
Out Of Stock
Model: WRL-2512
Brand: rhydoLABZ
Description: HC-05 is a low cost, easy to use Bluetooth module which communicates using RS-232 protocol. The device becomes ready to use by plugging in the adaptor and serial cable.
It has two modes of operation, namely AT command mode and Data communication mode.In AT command mode, we can configur..
Rs 499.00
Model: ROB-2579
Brand: rhydoLABZ
The EllipZo-robotic chassis is a light weight, low cost, medium capacity multipurpose robotic chassis which provides a great opportunity for starters to give shape to their robotic ideas.
EllipZo is cut out of a 3mm acrylic sheet which provides a strong and rigid platform to build r..
Rs 2,399.00
Model: ROB-2580
Brand: rhydoLABZ
The R-Bot robotic chassis is a light weight, low cost, compact, medium capacity multipurpose robotic chassis which provides a great opportunity for rookies as well as pros to quench at least a bit of their limitless robotic passion carvings.
R-Bot is cut out of a 3mm acrylic sheet with 15 cm diam..
Rs 2,599.00
Model: ROB-2581
Brand: rhydoLABZ
iROVER-robotic chassis is a light weight, low cost, medium capacity multipurpose robotic chassis which provides a great opportunity for rookies as well as pros to quench at least a bit of their limitless robotic passion carvings.
iROVER robotic chassis is made of a 3mm thick acryl..
Rs 2,999.00
Model: QSB-2567
Brand: rhydoLABZ
Description: The All New Revised QSB (QuickStart Board) for PIC18F4550 is a Low Cost Development Board that can be used to quickly evaluate and demonstrate the capabilities of 40 PIN PIC18F4550 microcontrollers. The board is designed to work as a header board with access to all pins for ..
Rs 999.00
Out Of Stock
Model: QSB-2566
Brand: rhydoLABZ
Description: The All New Revised QSB (QuickStart Board) for PIC18F4580 is a Low Cost Development Board that can be used to quickly evaluate and demonstrate the capabilities of 40 PIN PIC18F4580 microcontrollers. The board is designed to work as a header board with access to all pins for external con..
Rs 1,499.00
Model: QSB-2565
Brand: rhydoLABZ
Description: The All New Revised QSB (QuickStart Board) for PIC18F4520 is a Low Cost Development Board that can be used to quickly evaluate and demonstrate the capabilities of 40 PIN PIC18F4520 microcontroller. The board is designed to work as a header board with access to all pins for external conn..
Rs 949.00