The RFID Shield (ID12LA) made by rhydoLABZ helps you to develop the RFID Based Access Control systems using Arduinos. The shield include almost everything an access control system needs. The onboard Relay driving circuitry help you to connect external relays to drive the magnetic locks, solenoi..
The RFID Shield (ID20LA) made by rhydoLABZ helps you to develop the RFID Based Access Control systems using Arduino. The shield include almost everything an access control system needs. The onboard Relay driving circuitry help you to connect external relays to drive the magnetic locks, solenoid valv..
The ATMEGA2560 Breakout board is a development board that has lower component count and smaller board size. It is an Arduino Mega 2560 compatible board based on the ATmega2560-16AU microcontroller. It solves a lot of issues like weight and size from the original arduino Mega. It has 54 digital input..
The TXB0106 is a bi-directional signal level shifter made by Texas Instruments. It features six channels of input/output signals and an output enable line that allows the signal lines to be placed in a high impedance mode when they are unneeded. Depending on the high and low side voltages, the bandw..
The Robot Controller with breadboard from Rhydolabz is a very compact solution for controlling upto 9 servomotors and 2 DC motors with breadboard. Breadboard is provided to add any additional circuitry. Onboard GPIO and ADC pins for connecting external devices. Both wired (through FTDI connector) an..
The rhydoLABZ Micro-SD Card Breakout With TXB0104 is a a 4-bit bidirectional voltage-level translator allows you to utilize a microSD card. This breakout board included level shifting hardware (Texas Instruments TXB0104) with automatic direction sensing, 3.3V voltage regulator IC for controllin..
The SIM5360E 3G/GSM/GPRS/GPS UART modem, a high quality commercial grade product from rhydoLABZ, which is professionally designed with impedance matching RF PCB designs and, is built with Dual-Band UMTS/HSPA+ 900/2100MHz and Quad-Band GSM/GPRS/EDGE 850/900/1800/1900MHz which combines GPS technology ..
Description : ITR20001/T Reflective Optical Sensor is an array of five Reflective IR sensors that have been configured to read as digital bits. This sensor works by detecting reflected light coming from its own infrared LED. By measuring the amount of reflected infrared light, it can detect transiti..
SIM800C GSM/GPRS RS232 modem (DB9) is a high quality commercial grade product from rhydoLABZ, which is professionally designed with impedance matching RF PCB designs and is built with Quad Band GSM/GPRS engine-SIM800C from SIMCOM, works on frequencies 850/ 900/ 1800/ 1900 MHz. The Modem is populated..
The Robot Controller Mini from Rhydolabz is a very compact solution for controlling upto 9 servomotors and 2 DC motors or 5 Digital I/O (Servo motors), 4 Analog Sensors and 2 DC Motors . The onboard host microcontroller ATMEGA328P running at 16MHz clock controls the Servos, Sensors and DC motors. Th..
The Servo Controller-18 channel from rhydoLABZ is a very compact solution for controlling upto eighteen servomotors via USB, UART or XBEE. The host microcontroller ATMEGA328P running at 16MHz clock controls the servos based on serial commands received. This servocontroller can be interfaced with wir..
The Robot Controller Mini from Rhydolabz is a very compact solution for controlling upto 9 servomotors and 2 DC motors or 5 Digital I/O (Servo motors), 4 Analog Sensors and 2 DC Motors with MPU 6050 based motion tracker (3 axis Accelerometer _ GYRO) and magnetometer (HMC 5883) to sense the Direction..
GSM/GPRS Quad band TTL UART modem( SIM800C)
from rhydoLABZ, is built with Quad Band GSM/GPRS engine- SIM800, works on frequencies 850/ 900/ 1800/ 1900 MHz. The Modem comes with selectable interfacing voltage, which allows you to connect 5V & 3V3 microcontroller directly without any level conve..
Description : Raspberry Pi-IO Board is designed to plug directly on to the GPIO of Raspberry Pi2,Raspberry Pi Model B+ and Raspberry Pi 3. It is very easy to sense and control the real world with Raspberry Pi-IO Board to detect the state of a switch. For example from a door sensor, a pressure pad or..
Raspberry Pi GPIO Expansion Module can effectively solve the insufficiency of Raspberry pi IO port. This Module is designed specifically for the Raspberry Pi A,B,B+,2,3,4 IO expansion modules. Module uses four 74HC595 chips to expand 32 IO ports. The top of the module will expand the GPIO of R..