Model: ARD-1416
Brand: Sparkfun - USA
Description: This is a Arduino-compatible autopilot board designed by Chris Anderson and Jordi Muñoz of DIY Drones using the new ATMega328. This board was used to win the annual autonomous vehicle competition put on by SparkFun.
ArduPilot is a fully programmable autopilot that requires a GPS module..
Rs 1,524.00
Model: PRO-1407
Brand: Sparkfun - USA
Description: The PICAXE USB programmer made by SPARKFUN allows PICAXE micros to be programmed from any platform (Windows and Linux). The programmer uses the FT232R and will show up on your computer as a new COM port. Under windows - you'll need to install FTDI drivers but it's really easy!
This bo..
Rs 1,065.00
Model: INT-1406
Brand: Sparkfun - USA
This is a board from SPARKFUN is designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. This board electrically isolates a controller from the high-power system by use of an opto-isolator IC. This IC has two LE..
Rs 399.00
-50 %
Model: QSB-1405
Brand: Sparkfun - USA
Description: Development/prototype board for MSP430F1121 A microcontrollers with power supply circuit, crystal oscillator circuit, JTAG port, LEDs, Buttons, Buzzer, RS232 interface.
MSP430F1121A Board Features:
MCU: MSP430F1121A
4K Bytes Program Flash
256 Bytes data Flash
..
Rs 998.00 Rs 1,996.00
Model: ARD-1381
Brand: Sparkfun - USA
Update: After taking a figurative lashing from the comments section we're begging for mercy by updating the microSD Shield board. All new microSD shields have a voltage converter chip on-board that converts the Arduino 5V signals to 3.3V signals in accordance with SD specifications. No more 'blown u..
Rs 849.00
Model: ROB-1380
Brand: Sparkfun - USA
Description: This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and includes 4 mounting holes in the corners.Dimensions: 1" x 1.25"Documents:
SchematicEagle FilesTutorialGitHub ..
Rs 149.00
Model: ARD-1379
Brand: Sparkfun - USA
Description: The Joystick Shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers.The momentary push buttons are connected..
Rs 440.00
Model: ROB-1378
Brand: Sparkfun - USA
Description: This is a resistive analog joystick, very similar to those found on the PSP1000. These compact joysticks are different in that they have a very interesting 'slide' feeling. There are two resistive outputs - one for each axis, and no select button as found on the larger Thumb Joystick. I..
Rs 279.00
Model: ROB-1377
Brand: Sparkfun - USA
Description: This is a joystick is the analog joystick on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers - one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated when the joystick is pressed down.
Get ready,to enable y..
Rs 274.00
Model: ROB-1375
Brand: Sparkfun - USA
Description: This is a heavy-duty joystick very similar to the ones in claw arcade games. Directional movements are momentary limit switches - one for each direction. This joystick also has a select button that is actuated when the red button is pressed down.
This joystick is pretty beefy and ver..
Rs 1,649.00
Model: ROB-1374
Brand: Sparkfun - USA
Description: 4-way Pacman type arcade joystick. Heavy duty design gives this joystick a great feel!Features:
ABS plastic and solid alloy constructionUses 4 microswitches to detect on/off positionUnique handle designSpring return to centerVery rugged constructionRated 5A @ 125V, 3A @ 250VDimensions:..
Rs 1,599.00
Model: SEN-1372
Brand: Sparkfun - USA
Description: Simple breakout board for the MQ - 3, MQ - 4 and MQ - 6 gas sensors. All you need is VCC at 5V, GND, and a resistor to an ADC, that is it.
Note: This is the PCB only.
Dimensions: 16.8mm diameter
Documents:
Schematic
Eagle Files
Wiring Example
product page..
Rs 69.00
Model: LIL-1370
Brand: Sparkfun - USA
This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.
This is an inductive buzzer meaning that is will act as a short to grou..
Rs 449.00
Model: LIL-1368
Brand: Sparkfun - USA
Sparkfun designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each ..
Rs 89.00
Model: LIL-1366
Brand: Sparkfun - USA
This is a large board for prototyping through hole components with the LilyPad system. There are an array of pins all shorted together with 10mil traces. This allows for quick and easy prototyping - all you have to do is cut the traces between holes you don’t want connected! Standard 0.1" array. Che..
Rs 599.00