Model: LIL-1501
Brand: Sparkfun - USA
Here is a simple 5 pack of blue LEDs for LilyPad, or whatever else you can dream up. Light up the night!
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow..
Rs 335.00
Model: ARD-1490
Brand: Sparkfun - USA
You've been waiting on this forever and here it is! This is a simple plastic plate that holds an Arduino (Duemilanove or Uno) and self adhesive clear breadboard. It makes prototyping projects easier and gives you a solid place to hook things up. The Arduino board snaps in and the breadboard can eith..
Rs 269.00
Model: COM-1488
Brand: Sparkfun - USA
Description: Resonators function like crystals but stick closer to their specified frequency over a full temperature range. These resonators are +/-0.5% or better from -20C-+80C. These resonators have built-in load capacitors so no external caps are needed.Package Includes:1 x Ceramic Resonator 20MH..
Rs 76.00
Model: ROB-1449
Brand: Sparkfun - USA
Description: The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface. The serial interface is easy to use and it lets the user select an individual motor, the direction, and the desired speed constant (up to 10 different speed from stop ..
Rs 1,645.00
Model: ARD-1446
Brand: Sparkfun - USA
Description: The MIDI Shield board gives your Arduino access to the powerful MIDI communication protocol, so you can control synthesizers, sequencers, and other musical devices. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of y..
Rs 1,314.00
Model: WID-1443
Brand: Sparkfun - USA
Description: This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. ..
Rs 399.00
Model: PRO-1441
Brand: Sparkfun - USA
This new version uses an SMD 5x2 header. This is a simple to use USB AVR programmer. It is low cost, easy to use, works great with AVRDude, and is tested extensively on a Windows desktop. Based on Dick Streefland’s USBtiny and Limor Fried’s USBtinyISP. This is a low-cost programmer designed for thos..
Rs 1,299.00
Model: WID-1438
Brand: Sparkfun - USA
Description: This board is a unique board recommended by a SparkFun customer. When playing with SD, you sometimes need to view what the SPI traffic is doing, whether for hacking or debugging. The SD Sniffer allows you to hook up an external device, such as a logic analyzer or microcontroller, to vie..
Rs 969.00
Model: WID-1437
Brand: Sparkfun - USA
Description: The Bus Pirate, created by Ian Lesnet and featured on Hack a Day, is a troubleshooting tool that communicates between a PC and any embedded device over most standard serial protocols, which include I2C, SPI, and asynchronous serial - all at voltages from 0-5.5VDC. This product eliminate..
Rs 1,999.00
Model: INT-1436
Brand: Sparkfun - USA
This is a breakout board for the RN-131C WiFly GSX module, an ultra-low power 802.11b/g transceiver. This board breaks out all pins of the RN-131C to two 17-pin 0.1" pitch headers. Board comes fully assembled and tested as pictured.The WiFly GSX module is a stand alone, embedded wireless 802.11 netw..
Rs 5,864.00
Model: ARD-1435
Brand: Sparkfun - USA
Description: The WiFly Shield equips your Arduino the ability to connect to 802.11b/g wireless networks. The featured components of the shield are a Roving Network's RN-131C wireless module and an SC16IS750 SPI-to-UART chip. The SPI-to-UART bridge is used to allow for faster transmission speed and t..
Rs 6,499.00
Model: ARD-1431
Brand: Sparkfun - USA
Description: The Cellular Shield from SPARKFUN for Arduino includes all the parts needed to interface your Arduino with an SM5100B cellular module. This allows you to easily add SMS, GSM/GPRS, and TCP/IP functionalities to your Arduino-based project. All you need to add cellular functionality to you..
Rs 6,699.00
Model: PRT-1430
Brand: Sparkfun - USA
8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm). We've made..
Rs 129.00
Model: PRT-1429
Brand: Sparkfun - USA
Low-cost basic SOIC break out boards from SPARKFUN. These are custom PCB boards that interface standard SOIC devices to standard .1" headers.
28-SOIC: Standard .6" spacing between pins. Will fit directly into a standard width (600 mil) DIP socket. For wide ICs (memories, drivers, 74s, etc).
Speci..
Rs 129.00
Model: PRT-1428
Brand: Sparkfun - USA
This is a basic SOIC breakout boards from SPARKFUN. This custom PCB will interface a standard SOIC package IC to 0.1" headers, which are easier to work with and integrate well with breadboards.
There is DIP-standard 0.6" spacing between the two rows of pins.
40 Pin break-away headers are perfect f..
Rs 129.00