Description: If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun USB LiPo Charger is a basic charging circuit that allows you to charge 3.7V LiPo cells at a rate of 500mA or 100mA. It is designed to charge single-cell Li-Ion or Li-Polymer batteri..
Description: Riding on the waves of the very popular Arduino USB board is this small prototyping shield. The ProtoShield mates with the Arduino USB board and gives the user a small soldering area, two general LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and most important of all ..
Description: This shield allows you to use a computer power supply (or other power source) to use your Arduino to switch high current. With RFP30N06LE MOSFETS, you can easily control a lot of current directly from your Arduino.
The board provides 6 PWM outputs via screw terminals. Check the datashe..
The board comes pre-loaded with the SparkFun USB to Serial COM Port
firmware. When the board plugs into a USB port, Windows will ask for a
driver, point to the driver .inf file found here.
The board should now enumerate as a 'SparkFun COM Port' and act the
same as the SparkFun FTDI Basic. In..
Description: 4-digit 7-segment displays are really neat little devices, it’s a shame that they can be so cumbersome to control. Well we’ve solved that problem by making them a little bit “smarter.” The SparkFun 7-Segment Serial Display combines a classic 4-digit 7-segment display and an ATMega328 mi..
Description: 4-digit 7-segment displays are really neat little devices, it's a shame that they can be so cumbersome to control. Well Sparkfun have solved that problem by making them a little bit "smarter." The 7-Segment Serial Display combines a classic 4-digit 7-segment display and an ATMega328 mic..
Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes.
The TSOP38238 is a miniaturized receiver for infrared remote control systems. A PIN di..
Description: The new version of the Ardubot PCB breaks out all the Arduino pins to a separate row of headers. It also includes spaces for LEDs, a reset switch, and servo headers.The Ardubot PCB can be the foundation of your own Arduino-powered bot. When combined with a few other offerings, the Ardub..
Description: The Video Game Shield is an Arduino add-on shield to make your own video games, including graphics, text, sound effects, and music! Using the power of open source, this shield includes everything you need to make awesome black-and-white video games on your TV. It supports up to two Nint..
Description: The Open heart kit is an LED matrix of individually addressable LEDs. This little kit can be used in many applications. By using a Charliplexing technique for addressing the LEDs, you only need 6 wires from a micro controller to light things up. The Open heart kit was designed with Ardu..
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pi..
The LilyPad Battery Connect simply gives you a connection point for a battery or anything else you might want to plug in to your LilyPad system. It consists of a single 2-pin JST connector on a small LilyPad board with positive and negative terminals.
LilyPad is a wearable e-textile technology deve..
Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that channel...
Description: The new version of this shield allows for either 3.3 or 5v logic, a separate and more robust VIN connection, and the PWM input has moved to pin 3.This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per chann..
The LilyPad XBee is a breakout board for the popular XBee modules that can be sewn into your e-textile projects to provide them with a little “connectivity.” This board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system. Once sewn into your project just att..