Model: DEV-2489
Brand: Sparkfun - USA
Description: This is a shield for the CC3000 WiFi Module. The CC3000 from TI (Texas Instruments) is a self-contained wireless network processor that makes incorporating internet connectivity into your project simple. Instead of the more standard UART communication method, the CC3000 module utiliz..
Rs 3,219.00
Model: PRT-2492
Brand: Sparkfun - USA
The NCP1402 is a 3.3V DC-DC converter. The breakout board will accept voltage inputs between 1 and 3 Volts (such as 1 or 2 AA batteries) and output a constant, low ripple 3.3V output capable of sourcing up to 200 mA. This board is great for supplying power to 3.3V sensors or providing 3.3V from a a ..
Rs 499.00
Model: PRT-2420
Brand: Sparkfun - USA
This is a very simple board that takes a 4-9V input voltage and outputs a selectable 1.8V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard.
Input power can be supplied to either the DC barrel jack or the two pin header labeled + and -. Output power is sup..
Rs 1,199.00
Model: SEN-2411
Brand: Sparkfun - USA
The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does away wit..
Rs 1,999.00
Model: SEN-2410
Brand: Sparkfun - USA
Description: The SparkFun 9DOF Sensor Stick is a very small sensor board with 9 degrees of freedom. It includes the ADXL345 accelerometer, the HMC5883L magnetometer, and the ITG-3200 MEMS gyro. The ‘stick’ has a simple I2C interface and a mounting hole for attaching it to your project. Also, the boa..
Rs 6,799.00
Model: SEN-2409
Brand: Sparkfun - USA
This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 MEMS gyro. With this board, you get a full 6 degrees of freedom. The sensors communicate over I2C and one INT output pin from each sensor is broken out. If you need a simple and tiny board that gives you 6 degrees of freedom, t..
Rs 2,999.00
Model: PRT-2356
Brand: Sparkfun - USA
8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm). Sparkfun h..
Rs 129.00
Model: PRT-2344
Brand: Sparkfun - USA
8, 16, 20, and 28-Pin SSOP to DIP break out boards are manufactured by Sparkfun. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes..
Rs 129.00
Model: PRT-2343
Brand: Sparkfun - USA
8-Pin SSOP to DIP break out board. The footprint was rotated to accommodate different width SSOP devices and can be used with 8 pin SSOPs. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm). Sparkfun 'have made these 0.635mm devices f..
Rs 129.00
Model: LIL-2256
Brand: Sparkfun - USA
The LilyPad MP3 Player is your all-in-one audio solution, containing an Arduino-compatible microcontroller, MP3 (and many other formats) audio decoder chip, micro-SD card socket, and a stereo audio amplifier. Part of the Lilypad E-textiles line, this board can be used to give your fabric creations t..
Rs 3,282.00
Model: INT-2255
Brand: Sparkfun - USA
Introducing the 3.3V SparkFun
FT231X Breakout board, complete with the full UART hardware handshake
feature! The pinout of this board matches the FTDI cable to work with
official Arduino and cloned 3.3V Arduino boards. It can also be used for
general serial applications. This board still bri..
Rs 989.00
Model: ARD-2178
Brand: Sparkfun - USA
 Description: We know what you're thinking: "That is awesome... what is it?" This is an Arduino shield with pogo pin connectors for each and every GPIO. It's essentially the same rig we use to develop and test shields here at SparkFun! The pogo pins allow you to connect an Arduino shield to the dev..
Rs 2,699.00
Model: SEN-2177
Brand: Sparkfun - USA
Description: Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it's easy to interface ..
Rs 1,199.00
Model: PRO-2175
Brand: Sparkfun - USA
Description: The ATtiny45 and 85 are a couple of really cool little MCUs but did you know you can program them in Arduino? That's right, now you can shrink your Arduino projects down to "tiny size" by moving your code straight over to these small but capable ICs. The standard method for programming ..
Rs 1,249.00
Model: RAS-2173
Brand: Sparkfun - USA
Description: The Raspberry Pi packs plenty of processing power in a small and inexpensive package and that makes it perfect for robot brains! The only problem? The Raspberry Pi may have plenty of low-level hardware peripherals but motor controllers aren't one of them. That's why the RaspiRobot proje..
Rs 1,799.00