Out Of Stock
Model: LIL-1627
Brand: Sparkfun - USA
The LilyPad Battery Connect simply gives you a connection point for a battery or anything else you might want to plug in to your LilyPad system. It consists of a single 2-pin JST connector on a small LilyPad board with positive and negative terminals.
LilyPad is a wearable e-textile technology deve..
Rs 164.00
Model: LIL-1624
Brand: Sparkfun - USA
Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that channel...
Rs 499.00
Stock Clearance Sale
-52 %
Model: ARD-1619
Brand: Sparkfun - USA
The new version of this shield allows for either 3.3 or 5v logic, a separate and more robust VIN connection, and the PWM input has moved to pin 3.This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per channel. The board..
Rs 799.00 Rs 1,666.00
Stock Clearance Sale
-40 %
Model: LIL-1610
Brand: Sparkfun - USA
The LilyPad XBee is a breakout board for the popular XBee modules that can be sewn into your e-textile projects to provide them with a little “connectivity.” This board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system. Once sewn into your project just att..
Rs 599.00 Rs 999.00
Model: MIS-1544
Brand: Sparkfun - USA
It's not what project you have in mind that may use a rocket launch switch... The question is what project will you come up with once you have one in hand? Everyone has a proverbial missile to launch.
The hot red safety cover protects a toggle switch from accidentally being turned on. When flippe..
Rs 129.00
Stock Clearance Sale
-83 %
Model: ARD-1543
Brand: Sparkfun - USA
The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the ..
Rs 149.00 Rs 889.00
Stock Clearance Sale
-90 %
Out Of Stock
Model: ARD-1541
Brand: Sparkfun - USA
The Danger Shield mounts on top of your Arduino or Arduino Pro and equips it with a variety of fun and useful inputs and outputs. The Danger Shield has so much potential; we can't wait to see what you're able to do with it!
The shield's features include:
Three linear slide potentiome..
Rs 169.00 Rs 1,699.00
Model: WID-1540
Brand: Sparkfun - USA
Description: You don't have the power? Well, there's no need to ask Scotty the SparkFun Benchtop Power Board Kit has your back. This board will let you take advantage of your old (or new) power supply to create a benchtop power supply with enough juice to run almost any of your embedded electronics ..
Rs 1,430.00
Stock Clearance Sale
-66 %
Model: WRL-1539
Brand: Sparkfun - USA
Description: These are the nRF2401A 2.4GHz transceiver modules with built in chip antenna designed around the Nordic Semiconductor nRF2401A with high sensitivity and range. Units come with an empty 0.1" spaced footprint ready for a straight header, right angle header (recommended), or your own wires..
Rs 499.00 Rs 1,449.00
Stock Clearance Sale
-64 %
Model: WID-1535
Brand: Sparkfun - USA
Description: The SparkFun Logomatic v2 takes everything we learned with multiple logging projects over the years and boils it down to an easy to use device, that is now more adaptable than ever! Version 2 incorporates the LPC2148 with microUSB, battery charging, FAT32 formatting, and microSD support..
Rs 1,799.00 Rs 4,999.00
Model: SEN-1528
Brand: Sparkfun - USA
Description: This is a very small infrared receiver based on the TSOP85 receiver. This receiver has all the filtering and 38kHz demodulation built into the unit. Simply point a IR remote at the receiver, hit a button, and you'll see a stream of 1s and 0s out of the data pin.
Features of TSOP85 re..
Rs 771.00
Model: WID-1523
Brand: Sparkfun - USA
Description: This is a through-hole version of the popular surface mount Simon kit. This newer version comes with an ATmega328 instead of the ATmega168. All components are through-hole, making this kit great for beginners. When building this kit, you'll have a chance to solder a 28-pin microprocesso..
Rs 1,784.00
Model: DIS-1512
Brand: Sparkfun - USA
4-digit 7-segment displays are really neat little devices, it’s a shame that they can be so cumbersome to control. Well we’ve solved that problem by making them a little bit “smarter.” The SparkFun 7-Segment Serial Display combines a classic 4-digit 7-segment display and an ATMega328 microcontroller..
Rs 1,049.00
Stock Clearance Sale
-62 %
Model: WRL-1509
Brand: Sparkfun - USA
Breakout Board for XBee Module is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it breadboard DIP friendly. We highly recommend using the f..
Rs 49.00 Rs 129.00
Model: SEN-1507
Brand: Sparkfun - USA
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin.
Package Includes:
1 x TEMT6000 Breakout Board
Documents:&n..
Rs 339.00