Model: CAB-2172
Brand: Sparkfun - USA
Description: The pcDuino AV Kit from Sparkfun includes everything you need to get your LinkSprite pcDuino powered, networked and connected to an HDMI enabled TV or monitor. If you don’t happen to have all of these cables laying around, this is the easiest way to get up and running with your pcDuino...
Rs 3,779.00
Stock Clearance Sale
-71 %
Out Of Stock
Model: DEV-2171
Brand: Sparkfun - USA
Description: At SparkFun they use many Arduinos and they're always looking for the simplest, most stable one. Each board is a bit different and no one board has everything we want, so they decided to make their own version that combines all our favorite features. The RedBoard combines the simplicity..
Rs 499.00 Rs 1,710.00
Model: WID-2163
Brand: Sparkfun - USA
Fingerprint scanners are awesome. Why use a key when you have one right at the tip of your finger? Unfortunately, they're usually unreliable or difficult to implement. Well not anymore! We've found this great fingerprint module from ADH-Tech that communicates over TTL Serial so you can easily embed ..
Rs 3,999.00
Stock Clearance Sale
-80 %
Model: ARD-2088
Brand: Sparkfun - USA
The RFM22 is a low-cost ISM FSK transceiver module which offers communication at 433MHz ISM and adjustable output power of up to +20 dBm. What does that mean for you? It means your Arduino now has an inexpensive way to talk to other Arduinos so building point-to-point and even basic mesh networks ju..
Rs 399.00 Rs 1,999.00
Stock Clearance Sale
-57 %
Model: INT-1921
Brand: Sparkfun - USA
SparkFun Real Time Clock (RTC) Module, this little breakout that uses the DS1307 to keep track of the current year, month, day as well as the current time. The module comes fully assembled and pre-programmed with the current time (MST) and uses small CR1225 Lithium coin cell battery (not included) t..
Rs 499.00 Rs 1,149.00
Stock Clearance Sale
-86 %
Model: PRT-1919
Brand: Sparkfun - USA
This is a Lithium Polymer charger. This little black box charges single cell lithium polymer batteries with a max rate of 1A. This works well with 5V/1A regulated supply. The charge output is via a 2-pin screw terminal. Top pin is ground, bottom pin is charge pin. Based on the popular Microchip part..
Rs 299.00 Rs 2,118.00
Model: PRT-1894
Brand: Sparkfun - USA
This is a 6-pin 1.5mm pitch connector which mates directly with the connector on the Sharp GP2Y1010AU0F optical dust sensor. This is a ZH series JST connector.
Specifications:
1.5mm pitch connector
6 pin
JST connector
dust sensor connector
Package includes:
1 x Mating Conne..
Rs 13.00
Stock Clearance Sale
-83 %
Out Of Stock
Model: ARD-1888
Brand: Sparkfun - USA
Looking for a place to store all your spare parts? This plastic carrying case is big enough to store most of your left-overs. It has a total of 9 compartments and the dividers slide into grooves in the lid, preventing any components from transferring between compartments. Four tabs keep the li..
Rs 99.00 Rs 599.00
Model: COM-1883
Brand: Sparkfun - USA
Description: This is a translucent silicon rubber button pad with 16 buttons.
Each button has a hole underneath that accepts either a 3mm or 5mm
standard LED. The idea is that you can create a button interface of your
choice with the ability to display simple colors under each button.
Mainly..
Rs 767.00
Stock Clearance Sale
-70 %
Model: LIL-1878
Brand: Sparkfun - USA
A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 100mA. Short circuit protected.This board has AAA battery clips but can use an ..
Rs 299.00 Rs 999.00
Model: COM-1876
Brand: Sparkfun - USA
Description: This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad.Now..
Rs 559.00
Stock Clearance Sale
-58 %
Model: ARD-1791
Brand: Sparkfun - USA
The MPR121 IC is a great way to build simple capacitive touch interfaces, and now it's even easier to incorporate into your Arduino projects with the touch shield. The touch shield has 9 capacitive touch pads, with headers for the remaining 3 electrode connections. With this shield you can have a to..
Rs 399.00 Rs 949.00
Model: DIS-1763
Brand: Sparkfun - USA
This breakout board for the popular Nokia 6100 Knock-off color LCD has an improved backlight driver circuit (boosts to 7V) , plus a tri-color status LED and 2 pushbuttons, all accessed through one 12-pin 0.1" spaced header. Slightly less versatile than the previous version yet slightly more f..
Rs 2,734.00
Stock Clearance Sale
-90 %
Model: WID-1743
Brand: Sparkfun - USA
If you need to charge LiPo batteries, this simple charger will do just that. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. The board incorporates a charging circuit, status LED, connector for your battery (JST-type used in the batteries we carry), and a mini-USB connector.
..
Rs 49.00 Rs 499.00
-40 %
Model: DEV-1742
Brand: Sparkfun - USA
Description: This is a breakout board for the ATmega128RFA1. It includes an on board 3.3V regulator, chip antenna, and DC input jack. The board can be powered with either a 5V or a 9V wall wart. ATmega128RFA1 is an IEEE 802.15.4 compliant single-chip, combining the industry- leading AVR microcontrol..
Rs 2,649.00 Rs 4,415.00