SparkFun Haptic Motor Driver - DRV2605L board breaks out Texas Instrument's DRV2605L Haptic Motor Driver, which adds meaningful feedback from your devices using the breakout and an Arduino-compatible device.The DRV2605L is capable of driving two different types of motors, ERM and LRA. The default fi..
SparkFun LED Driver Breakout - LP55231 is a self-contained solution for developing and deploying the nine-channel I2C LED controller. The breakout is equipped primarily with just the LP55231 LED controller IC and three RGB LEDs. It also features pads and jumpers for replacing the onboard LEDs with e..
Sparkfun Particle Sensor Breakout - Max30105 is a powerful sensor enabling sensing of distance, heart rate, particle detection and even the blinking of an eye. The MAX30105 has been equipped with three LEDs with a very sensitive photon detector. The idea is to pulse the different LEDs, then detect w..
This Muscle Wire has 0.005" diameter and is one foot long piece of nickel-titanium alloy that can flex and contract when a specific amount of heat or current is applied to it. When the Muscle wire is in its martensitic form, it can be formed and bent into different shapes. However, when an electrica..
The Lilypad simple power is simple e-textile board which allows to connect and charge a lipo battery and switch it on or off. Using this LilyPad simple power it is very easy to add power to wearable circuit. Lilypad is a wearable e-textile technology each Lilypad was creatively designed to have larg..
The SparkFun AutoDriver- Stepper Motor Driver ( v13 ) board is based on the STMicro L6470 dSPIN stepper motor driver. STMicro’s L6470 is a 3A, 8–45V bipolar stepper motor driver, it can be used to control a stepper motor with a voltage from 8 to 45V at 3 arms over an SPI connection. The Auto driver ..
This small super capacitor cap can be charged up and then slowly dissipated running an entire system for hours. Combine two in series for 0.5F/5V. Do not over voltage or reverse polarize these capacitors.
Specifications of Super Capacitor - 10F/2.5V:
Working voltage: 2.5V
Capacitance: ..
The SparkFun OpenScale is a, open source solution for measuring weight and temperature. It has the ability to read multiple types of load cells and offers a simple-to-use serial menu to configure calibration value, sample rate, time stamp and units of precision. Simply attach a four-wire or five-wir..
The LSM303C is a 6 Degrees of Freedom (6DOF) inertial measurement unit (IMU) in a single package, specifically developed as an eCompass device. Due to the IC housing a 3-axis accelerometer and a 3-axis magnetometer combined with its low cost, the LSM303C was perfect for us to create this small break..
Thermocouple Breakout - MAX31855K - SparkFun is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and makin..
If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Mini Breakout is a great landing spot. The SAMD21 Mini Breakout is a Pro Mini-sized breakout for the Atmel ATSAMD21G18, a 32-bit ARM Cortex-M0+ processor with 256KB flash, 32KB SRAM, and an oper..
RFM69 Breakout (434MHz) - SparkFun, breaks out all the pins available on the RFM69HCW module making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine) radio band. It’s perfect for building inexpe..
9 Degrees of Freedom IMU Breakout - LSM9DS1 - SparkFun is a versatile, motion-sensing system-in-a-chip. It houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer – nine degrees of freedom (9DOF) in a single IC! The LSM9DS1 is equipped with a digital interface, but even that is flex..
SparkFun OpenLog is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. This is the updated version of WID-1433.
The OpenLog can store or “log” huge amounts of serial data and act as a black box of sorts to store all the serial data that your..