Model: SEN-3747
Brand: Pololu - USA
This board is a 3-channel time-of-flight proximity and distance sensor module based on the OPT3101 IC from Texas Instruments. Unlike conventional IR sensors that use the intensity of reflected light to estimate the distance to an object, this board emits 940 nm infrared light pulsed at 10 MHz, and t..
Rs 2,239.00
Model: PRT-3321
Brand: Pololu - USA
The USB Type-C connector is intended to supersede a wide range of existing USB connectors. It is reversible and can serve in both USB host and USB device roles, allowing either end of a cable to be plugged into a receptacle with either side up, and it can support negotiation of increased power (up t..
Rs 214.00
Model: ROB-3308
Brand: Pololu - USA
The RoboClaws have a USB interface that acts as a virtual serial (COM) port, allowing it to be controlled directly from a computer, and they feature built-in commands for controlling acceleration, deceleration, distance, speed, current sense, voltage limits and more. Several other interface modes ar..
Rs 8,999.00
Model: SEN-3749
Brand: Pololu - USA
The VL53L1X from ST Microelectronics is a long-distance ranging time-of-flight (TOF) sensor integrated into a compact module. This board is a carrier for the VL53L1X, so we recommend careful reading of the VL53L1X datasheet before using this product.
The VL53L1X is effectively a tiny, self-containe..
Rs 799.00
Model: PRT-3323
Brand: Pololu - USA
The Texas Instruments TPS2113A autoswitching power multiplexer allows you to switch seamlessly between two power sources of 2.8 V to 5.5 V while blocking reverse current into either source. The power multiplexer (or mux) has an adjustable current limit that can be set as high as 2 A and an adjustabl..
Rs 399.00
Model: INT-3034
Brand: Pololu - USA
As digital devices get smaller and faster, once ubiquitous 5 V logic has given way to ever lower-voltage standards like 3.3 V, 2.5 V, and even 1.8 V, leading to an ecosystem of components that need a little help talking to each other. For example, a 5 V part might fail to read a 3.3 V signal as high..
Rs 229.00
Model: INT-3035
Brand: Pololu - USA
The A-Star 32U4 Prime is a general-purpose programmable board based on the ATmega32U4 AVR microcontroller from Microchip (formerly Atmel) and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. As such, the A-Star Prime (abbreviated A* Prime) is compatible with many Ar..
Rs 2,199.00
Model: ROB-3309
Brand: Pololu - USA
This board breaks out the VBUS, GND, D-, D+ and ID pins of a USB Mini-B connector. The VBUS and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB differential data signals. Each of these pins, along with the ID pin, are broken out into a 1×5 row..
Rs 149.00
Model: DEV-3361
Brand: Sparkfun - USA
The SparkFun Artemis Development Kit is the latest board to be released around the SparkFun Artemis Module and it allows access to more software development features than previous Artemis based boards. Recommended software used to program the Artemis DK are the Arduino IDE, Arm® Mbed™ OS (Studio and..
Rs 3,649.00
Model: INT-3032
Brand: Sparkfun - USA
Do you have too many sensors with the same I2C address? Put them on the SparkFun Qwiic Mux Breakout to get them all talking on the same bus! The Qwiic Mux Breakout enables communication with multiple I2C devices that have the same address that makes it simple to interface with. The Qwiic Mux also ha..
Rs 999.00
Model: SEN-3741
Brand: Sparkfun - USA
The SparkFun 9DoF IMU Breakout incorporates all the amazing features of Invensense's ICM-20948 into a Qwiic-enabled breakout board complete with a logic shifter and broken out GPIO pins for all your motion sensing needs. The ICM-20948 itself is an extremely low powered, I2C and SPI enabled 9-axis mo..
Rs 1,399.00
Model: SEN-3742
Brand: Sparkfun - USA
The Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout includes the MAX30101, a highly sensitive optical sensor and successor to the MAX30105 and MAX30102. The MAX30101 Breakout utilizes a photon detector to measure the amount of returning light that is reflected b..
Rs 1,999.00
Model: SEN-3743
Brand: Sparkfun - USA
The Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a calibrated and compensated pressure sensing range of 60mbar to 2.5bar, easy to read 24 bit digital I2C output, and can be calibrated and c..
Rs 1,349.00
Model: SEN-3744
Brand: Sparkfun - USA
Bosch's BMP388 is a blazingly fast, temperature stable, pinpoint accurate barometric pressure sensor specifically suited for altitude tracking in drone applications. We thought that sounded pretty cool, so we put it on a Qwiic-compatible breakout board to make it easier to prototype with. Simply con..
Rs 1,979.00
Model: SEN-3745
Brand: Sparkfun - USA
The VL53L3CX is an awesome ToF (Time of Flight) range finder from STMicroelectronics, who brought us the venerable VL53L1X. It shares the same diminutive form factor as its predecessor but has learned a cool new trick: Multi-object detection! With some very fancy algorithms, the VL53L3CX is able to ..
Rs 2,999.00