Model: MOT-3228
Brand: Pololu - USA
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 210.59:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
These t..
Rs 1,499.00
Model: ROB-3314
Brand: Pololu - USA
The Pololu 3pi+ 32U4 robot is a complete, high-performance mobile platform based on the Arduino-compatible ATmega32U4 MCU. Its many features include dual quadrature encoders for closed-loop speed or position control, line sensors, front bump sensors, and a full IMU (3-axis accelerometer, magnetomete..
Rs 8,699.00
Model: MOT-3238
Brand: Pololu - USA
These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1,and with three different motors: 6 V and 12 V motors with long-life carbon brushes (CB), and a 6 V motor with shorter-life precious metal brushes. All three motors offer similar performances a..
Rs 1,799.00
Model: MOT-3237
Brand: Pololu - USA
These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different motors: 6 V and 12 V motors with long-life carbon brushes (CB), and a 6 V motor with shorter-life precious metal brushes. All three motors offer similar performances ..
Rs 1,799.00
Model: MOT-3239
Brand: Pololu - USA
This breakout board makes it easy to use Toshiba’s TB67S128FTG microstepping bipolar stepper motor driver, which features adjustable current limiting and microstepping down to 1/128-step. In addition, it has the ability to dynamically select an optimal decay mode by monitoring the actual motor curre..
Rs 999.00
Model: PWR-3087
Brand: Pololu - USA
This board is a charge pump voltage inverter that converts an input voltage between 1.8 V and 5.3 V to a corresponding negative output voltage, with a typical efficiency of over 80%. The inverter can deliver a continuous output current of 60 mA across most of its operating range, making it a simple ..
Rs 199.00
Model: ROB-3315
Brand: Pololu - USA
This motor driver expansion board and its corresponding Python library make it easy to control a pair of bidirectional, brushed DC motors with a compatible Raspberry Pi (Model B+ or newer), including the Pi 3 Model B+ and Model A+. The expansion board uses a pair of Toshiba TB9051FTG motor drivers, ..
Rs 1,699.00
Model: ROB-3311
Brand: Sparkfun - USA
The ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Latch terminals provide instant solder-less connections to every feature offered. Use extensive Arduino Library with 10 examples, and you can quickly explore the many features of this prec..
Rs 1,799.00
Model: DEV-3364
Brand: Sparkfun - USA
The Artemis Development Kit is the latest board to be released around the SparkFun Artemis Module and it allows access to more software development features than previous Artemis based boards. This Kit includes the SparkFun Artemis DK board as well as the accessories (Himax camera & USB-C cable) nee..
Rs 4,599.00
Model: DEV-3363
Brand: Sparkfun - USA
The Qwiic Pro Micro is a revision of the original Pro Micro and is, overall, functionally the same as the previous version. The board is the same size as the original Pro Micro but added a few additional features by shrinking down some components on the board such as a reset button, Qwiic connector,..
Rs 1,699.00
Model: RAS-3421
Brand: Raspberry
The Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It feature the RP2040 which marks Raspberry Pi's first microcontroller designed in-house. Pico provides minimal (yet flexible) external circuitry to support the RP2040 chip (Flash, crystal, ..
Rs 295.00
Model: DEV-3362
Brand: Sparkfun - USA
The IOIO-OTG (pronounced “yo-yo-O-T-G”) is a development board specially designed, features a PIC microcontroller which acts like a bridge that connects an app on your PC or Android device to low-level peripherals like GPIO, PWM, ADC, I2C, SPI, and UART. An app-level library helps you write control ..
Rs 3,599.00
Model: WRL-3754
A very small single chip FM receiver module found in many portable media players. Based on the AR1010 IC from Airoha, the FM receiver uses a simple command set over an I2C or SPI interface. Crystal and supporting components are all on board, all you need to attach is an antenna.
Features:
World..
Rs 109.00
Model: DIS-3380
0.96" Yellow - Blue OLED Display Module I2C - 4 Pin can be interfaced with any microcontroller using IIC protocols. The package includes display board,display, 4 pin male header presoldered to board. OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-la..
Rs 299.00
Model: INT-3036
The Arduino compatible 5V laser diode module is ideal for applications such as controllable laser pointer, theft detection etc. It produces a small powerful beam of visible red light.
The laser head is composed of a light-emitting tube, condenser lens and adjustable copper sleeve and it is assemble..
Rs 99.00