Lumenati 90R - SparkFun USA

(0) 0 out of 5 stars Write reviewReport bug
  • Part No :
  • DIS-3303
  • Availability:
  • In Stock
  • Shipping :
  • Same Day*
  • Weight:
  • 0.024Kg
  • Made By:
  • Sparkfun - USA
  • Mfr.Part.No:
  • COM-14358
  • Quality Rank:
  • 90/100
Rs 359
(Excluding GST.)
Rs 424
(Including GST)
424 rhydoLABZ.com New In Stock
  • Buy & earn 36  reward points
  • GST Invoice & Input Credit Available
Quantity :

SparkFun Lumenati 90R is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position. The 90R board has been specifically designed to be daisy-chained with other Lumenati boards. The APA102C LEDs on each board with numbers indicating their position in the sequence to write code more easily. The Lumenati 90R gets its name from the 90° angle it takes and the direction the signal and power flow. Combining four of the 90R boards creates a 12-LED ring with enough space in the center for a Lumenati 8-pack board. To create more than a small ring, need to solder on 8-stick boards to the 90R to create outlines of different shapes and sizes.

The APA102C addressable LEDs operate on +5V power input, as well as 0–5V logic levels for clock and data, and employ a 2-wire communication protocol consisting of a clock line and a data line. While this requires one more wire than standard WS2812B LEDs, the advantage is that the communication with the LEDs becomes somewhat timing-independent, allowing you to run these directly off of a Raspberry Pi or other single-board computer that doesn’t normally allow for a long, precisely timed data stream without the use of additional hardware.

Note: There are two solder jumpers on the back of the 90R labeled CO and DO (clock out and data out) that can be cut to interrupt those signals in case you make a closed-loop design where you don’t want the clock and data from your last LED to interfere with the clock and data to your first. It is critical that you cut the traces in the jumpers of the last board in the loop before you power up your LEDs if you’ve put together a continuous loop of Lumenati boards. Otherwise, it is likely that you’ll burn out a couple of LEDs.

Features of SparkFun Lumenati 90R
 

  • LEDs employ a 2-wire communication protocol
  • Operating voltage +5V
  • Operating temperature : -40 °C to +70 °C

Package includes:
 

  • 1 x SparkFun Lumenati 90R

Dimensions:
 

  • 35.7mm x 17.7mm x 3.2mm (1.4" x 0.7" x 0.12")

Development Resources:
 

 

Sort by: Recently  /  Helpful Write review

There are currently no any reviews about this product.

There are currently no any question about this product.

Ask a question about Lumenati 90R - SparkFun USA

Report issue about the Lumenati 90R - SparkFun USA



Ask a question about the Lumenati 90R - SparkFun USA

Report issue about the Lumenati 90R - SparkFun USA



Request price match for the Lumenati 90R - SparkFun USA

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

Lumenati 90R - SparkFun USA