RoboClaw 2x7A Motor Controller (V5)

(0) 0 out of 5 stars Write reviewReport bug
  • Part No :
  • ROB-2643
  • Availability:
  • In Stock
  • Shipping :
  • Same Day
  • Weight:
  • 0.025Kg
  • Mfr.Part.No:
  • ION404
  • Quality Rank:
  • 100/100
Rs 7599
(Tax Excl.)
Quantity :
Description: The RoboClaw motor controller from Ion Motion Control (formerly Orion Robotics) can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual quadrature decoders make it easy to create a closed-loop speed control system. This version can supply a continuous 7.5 A per channel (15 A peak).

The RoboClaw features dual quadrature decoding capability. A built-in PID routine can be used for closed-loop speed control, maintaining motor speeds even if the load varies, or the encoder counts and speeds can be read directly from the RoboClaw for use with an external control system. Analog feedback is also supported for closed-loop position control.

The RoboClaw has a USB interface that acts as a virtual serial (COM) port, allowing it to be controlled directly from a computer. Several other interface modes are supported by the RoboClaw as well: it can be controlled via TTL serial for use with an embedded system, RC hobby servo pulses for use as an RC-controlled electronic speed control (ESC), or analog voltages for use with potentiometers or analog joysticks.

The RoboClaw 2x7A (V5) have USB Micro-B connectors. It is a slightly improved replacement for the 2x5A. The 2x7A can supply up to 7.5 A continuous and 15 A peak, up from 5 A and 10 A, and is otherwise functionally and physically identical to the 2x5A.

  • Simple bidirectional control of two brushed DC motors
  • 6 V to 34 V operating supply range
  • 7.5 A maximum continuous current output
  • Automatic current limiting reduces duty cycle when motor current is between 1× and 2× the controller’s rated current
  • Four communication or control options:
    • USB serial interface (virtual COM port)
    • Logic-level (TTL) serial interface for direct connection to microcontrollers or other embedded controllers
    • Hobby radio control (RC) pulse width interface for direct connection to an RC receiver or RC servo controller
    • 0 V to 2 V (5 V tolerant) analog voltage interface for direct connection to potentiometers and analog joysticks
  • Dual feedback inputs for PID closed-loop control:
    • Speed control with quadrature encoders, up to 19.6 million encoder pulses per second
    • Position control with analog encoders or potentiometers
    • (Open-loop control with no feedback also available)
  • Screw terminals for quick connect/disconnect
  • Configurable via pushbutton interface
  • Regenerative braking
  • Tolerates high-speed direction changes
  • Jumper-selectable 5 V BEC
  • Battery monitoring and under-voltage cutoff protects batteries from over-discharging
Dimensions: 1.7″ × 1.9″ × 0.7″

  • Motor channels: 2
  • Control interface:
    • USB
    • Non-inverted TTL serial (2-way)
    • RC servo pulses
    • Analog voltage
  • Minimum operating voltage: 6 V
  • Maximum operating voltage: 34 V
  • Continuous output current per channel: 7.5 A
  • Peak output current per channel: 15 A
  • Baud rates: 2400, 9600, 19,200, and 38,400 bps.
Sort by: Recently  /  Helpful Write review

There are currently no any reviews about this product.

There are currently no any question about this product.

Ask a question about RoboClaw 2x7A Motor Controller (V5)

Report issue about the RoboClaw 2x7A Motor Controller (V5)

Ask a question about the RoboClaw 2x7A Motor Controller (V5)

Report issue about the RoboClaw 2x7A Motor Controller (V5)

Request price match for the RoboClaw 2x7A Motor Controller (V5)

Found this item with same quality and at a lower price but prefer to buy from

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

RoboClaw 2x7A Motor Controller (V5)