WizFi220 Low Power Serial WiFi Module with Power Amp

(0) 0 out of 5 stars Write reviewReport bug
  • Part No :
  • WRL-2039
  • Availability:
  • In Stock
  • Shipping :
  • Same Day*
  • Weight:
  • 0.02Kg
  • Made By:
  • Wiznet
  • Mfr.Part.No:
  • WizFi220_CA
  • Quality Rank:
  • 100/100
Rs 2980
(Excluding GST.)
Rs 3516
(Including GST)
3516 rhydoLABZ.com New In Stock
  • Buy & earn 298  reward points
  • GST Invoice & Input Credit Available
Quantity :

Got Better Price

Description: The WizFi220_CA is an ultra low power serial to WiFi module with power amplifier and onboard Chip Antenna. The module provides serial UART interface which enables connection to any embedded design utilizing and 8/16/32-bit microcontroller via simple commands. The module supports data rates up to 11 Mbps, and is compliant with 802.11b. The Serial to Wi-Fi embedded software allows devices and appliance manufacturers to easily add WiFi capabilities to their products with minor impact on the host microcontroller firmware. The WizFi220 provides all the hardware and software necessary to quickly set up a serial (UART) based link to a PC or external microcontroller.



Features:
  • Brings Wi-Fi connectivity to any device with a microcontroller and serial HOST interface (UART)
  • Quick Booting Time : under 20msec
  • Minimal Serial to Wi-Fi “driver ” footprint on host microcontroller and minor changes to existing host MCU firmware
  • Offloading of smaller host microcontrollers from the Wi-Fi and TCP/ IP networking
  • Simple AT commands for configuration and data communication
  • Onboard Chip antenna
  • DHCP/Static IP, TCP/UDP, Server/Client, DNS, ARP
  • Easy device provisioning through our utility or Wi-Fi Protected Set-up (WPS)
  • Ultra low power consumption through dynamic power management
  • Operates with standard 802.11 b/g/n access points at speed up to 11 Mbps  (802.11b)
  • Security protocols (WEP, WPA, WPA2-PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP)
  • DSSS and CCK modulation
  • Rich I/O interfaces (SPI, UART, GPIO, I2C, ADC, JTAG)
  • Low power modes, Alarm Input for wake-up
  • High-throughput hardware AES and RC4 encr yption/decryption engines
  • Size 32 x 23,5 x 2,9 mm
  • CE, FCC, KCC certified
  • Limited AP Feature (Direct Connection to iPhone, iPad and Android-Phone without AP) 
  • 3.3V power source
Specification:
  • Radio Protocol: IEEE 802.11b/g/n Compatible 
  • Supported Data Rates: 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
  • Modulation: DSSS and CCK
  • RF Operating Frequency: 2.4 - 2.497 GHz
  • Antenna Options: Chip antenna
  • Networking Protocols: UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(**)
  • Power Consumption 
    • Standby: 34μA
    • Receive: 125mA
    • Transmit: 290mA
  • RF Output Power (Typical): 17dBm ± 1.5dB 
  • Security Protocols: WEP, WPA/WPA2?PSK, Enterprise (EAP-FAST, EAP-TLS, EAP-TTLS, PEAP)(**)
  • I/O Interface: UART, SPI(**), I2C(*), WAKE, ALARM, GPIOs
  • Power Source: 3.3V
  • Dimensions: 32 x 23.5 x 3 mm
Documents:
 
Sort by: Recently  /  Helpful Write review

There are currently no any reviews about this product.

There are currently no any question about this product.

Also purchased

Ask a question about WizFi220 Low Power Serial WiFi Module with Power Amp

Report issue about the WizFi220 Low Power Serial WiFi Module with Power Amp



Ask a question about the WizFi220 Low Power Serial WiFi Module with Power Amp

Report issue about the WizFi220 Low Power Serial WiFi Module with Power Amp



Request price match for the WizFi220 Low Power Serial WiFi Module with Power Amp

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

WizFi220 Low Power Serial WiFi Module with Power Amp



Sponsors