ESP8266 ESP-01 Remote Serial Port WIFI Transceiver is the new trend in WiFi IoT devices. Its low-cost and easy-to-use features which makes this module so popular. ESP-01 is tiny (25mm x 15mm) – fits in compact space and it has with simple pin connections (standard 2×4 pin headers).
One can communicate with ESP-01 over the serial TX/RX pins and similarly, use serial commands to query and change configurations of the WiFi module. Thus it would need only two wires (TX/RX) to communicate between a micro-controller and WiFi, but more importantly, it offloads WiFi-related tasks to the module, allowing the microcontroller code to be very light-weighted.
ESP8266 ESP-01 Remote Serial Port WIFI Transceiver can work effortlessly with platforms like Arduino. It has powerful on-board processing and storage capabilities which allows the module to be integrated with sensors and other application specific devices through its GPIOs.
With high degree of on-chip integration ESP-01 needs no or minimal external circuitry. The Module is addressable over SPI and UART, making this an exceptionally easy choice for anyone to build an Internet of Things thing. You can use AT commands to connect to WiFi networks and open TCP connections without need to have TCP/IP stack running in your own microcontroller.
ESP8266 ESP-01 Remote Serial Port WIFI Transceiver Features:
- Serial UART Interface
- It run LWIP
- 802.11 bgn
- WIFI Direct (P2P),SOFT-AP
- Built-in TCP/IP
- The AT command is perfect,efficient,concise
- Support three modes: AP, STA and AP+STA coexistence mode
- Onboard PCB Antenna
ESP8266 ESP-01 Remote Serial Port WIFI Transceiver Specifications:
- WIFI Direct (P2P),SOFT-AP
- Controlled via UART interface at 115200 baud with a simple set of AT commands
- Only 2 microcontroller pins needed for communication (RXD/TXD)
- Support three modes: AP, STA and AP+STA coexistence mode the TCP/IP protocol suit
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as application processor
- SDIO 1.1/2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
- ESP-01 PCBAntenna , after matching the distance to achieve open 400Meters.
ESP8266 ESP-01 Remote Serial Port WIFI Transceiver Package:
- 1x ESP8266 ESP-01 Serial WIFI Transceiver Module
Resources:
