Base Board for EM-18/μRFID (RS232,USB,TTL) - rhydoLABZ

(0) 0 out of 5 stars Write reviewReport bug
  • Part No :
  • RFID-2584
  • Availability:
  • In Stock
  • Shipping :
  • Same Day*
  • Weight:
  • 0.03Kg
  • Made By:
  • rhydoLABZ
  • Mfr.Part.No:
  • RFID-2584
  • Quality Rank:
  • 100/100
Rs 349
(Excluding GST.)
Rs 412
(Including GST)
412 New In Stock
  • Buy & earn 35  reward points
  • GST Invoice & Input Credit Available
Quantity :

The RFID Base Board is compatible with EM-18, micro RFID module and other modules with similar pinouts. It provides TTL, RS232 and USB interfaces for the RFID module. Module can be powered either via USB, DC barrel jack or the RMC connector provided onboard. The detected tag data can read over DB9 connector (RS-232), USB port or the RMC pins (TTL Serial out or Wiegand 26 out, as per selection). The base board can be connected to the USB port of a PC with the CP2102 driver installed, allowing the Windows applications to communicate with the Reader module via allocated COM port. With the appropriate EM-18/μRFID  module fitted, it is a complete “ready-to-use” RFID system which can be used as the base board for evaluation. It can also be used as an embedded board in application circuits of access control systems and all for in-circuit evaluation.

NOTE: No RFID reader module is included in this package, compatible reader module is available here

Jumper Connections:

  •      J1         Power Selection between DC input and USB
  •      J2         Output format selection (Short - WIEGAND 26, Open - Serial)

Features of RFID Base Board is compatible with EM-18:

  •     Compatible with micro RFID and EM-18 modules
  •     RS232, USB and TTL interfaces for data communication
  •     LEDS for visual status indication; Power and Tag Detection
  •     Audio alert on tag detection
  •     Multiple options for powering; via USB port or DC barrel jack and RMC connectors
  •     Jumper Selection for output format: Serial & Wiegand 26
  •     Wiegand 26 output pins brought out on board
  •     DPDT slide switch to select between USB and DB9 output
  •     5V on board regulation for DC power input
  •     Fuse protection when USB powered
  •     DC voltage input: 7~9V
  •     High Quality PTH FR-4 PCB


  •     Length: 80mm
  •     Width: 47mm
  •     Height: 14mm

Package Includes:

  •     1 x Base Board for EM-18/μRFID (RS232,USB,TTL)
  •     2 x Jumpers(2.54mm)


Sort by: Recently  /  Helpful Write review

There are currently no any reviews about this product.

    • Q
    • How to connect this board with microcontroller ? Which of the 9 pins is for the transmission ?

      asked by Jaahnvi Mohan on December 06, 2018
    • A
    • For connecting with microcontroller you have to use connector marked K2 and DOUT pin on it along with the Ground marked as GND. For more details Please check the Attached schematic ,

Ask a question about Base Board for EM-18/μRFID (RS232,USB,TTL) - rhydoLABZ

Report issue about the Base Board for EM-18/μRFID (RS232,USB,TTL) - rhydoLABZ

Ask a question about the Base Board for EM-18/μRFID (RS232,USB,TTL) - rhydoLABZ

Report issue about the Base Board for EM-18/μRFID (RS232,USB,TTL) - rhydoLABZ

Request price match for the Base Board for EM-18/μRFID (RS232,USB,TTL) - rhydoLABZ

Found this item with same quality and at a lower price but prefer to buy from

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

Base Board for EM-18/μRFID (RS232,USB,TTL) - rhydoLABZ