Dear Valued Customers: We're excited to announce our move to a new website! Existing Customers, kindly utilize the 'Forgot Password' option to update the Password. Thank you for your cooperation!
Description: Radio frequency identification(RFID) is the wireless use of electromagnetic fields to transfer data for the purposes of automatically identifying and tracking tags attached to objects. The tags contain electronically stored information.It can be directly interfaced with a microcontrol..
Description: RFID 13.576 MHz Card use for Contactless transmission of data and supply energy without battery. Its Operating distance is Up to 100mm depending on antenna geometry. The operating frequency is 13.576MHz and the Data transfer speed is 106 kbit/s .It is featured with Data integrity o..
The 'Rain' ultra-small UHF RFID tag from Murata is really exciting because of its fantastically small size. it's just 1.25 mm square with a height of 0.55 mm.It is an innovative RFID module which complies EPC global Gen2 (v2). This product can be used as an ultra small tag and this can be fit on any..
RFID Tag Keyfob used for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications. Its operating on a frequency of 13.56MHz, these tokens are all pre-programmed with unique ID numbers to communicate wirelessly with RFID Readers. It..
The RFID Shield (ID12LA) made by rhydoLABZ helps you to develop the RFID Based Access Control systems using Arduinos. The shield include almost everything an access control system needs. The onboard Relay driving circuitry help you to connect external relays to drive the magnetic locks, solenoid val..
The RFID Shield (ID20LA) made by rhydoLABZ helps you to develop the RFID Based Access Control systems using Arduino. The shield include almost everything an access control system needs. The onboard Relay driving circuitry help you to connect external relays to drive the magnetic locks, solenoid valv..
UHF RFID Tag - Adhesive is a paper-thin, adhesive EPCglobal Gen2 tag. It works with simultaneous RFID reader and can be stuck to anything. These tags can read and be written to. Each tag comes with a TID (Truly Unique ID) that can’t be changed, but there’s plenty of memory to write and read from.S..
UHF RFID Tag is a paper-thin EPCglobal Gen2 tags work with Simultaneous RFID reader. The tags can read and be written to. Each tag comes with a TID (Truly Unique ID) that can’t be changed, but there’s plenty of memory to write and read from.Specification of UHF RFID Tag:EPCglobal Gen2 and ISO/..
PN532 NFC RFID module V3 is built around NXP PN532. Near field communication (NFC) is a set of standards for smartphones and similar devices to establish radio communication each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. This is al..
RC522 - RFID Reader / Writer 13.56MHz with Cards Kit includes a 13.56MHz RF reader cum writer module that uses an RC522 IC and two S50 RFID cards. The MF RC522 is a highly integrated transmission module for contact-less communication at 13.56 MHz. RC522 supports ISO 14443A/MIFARE mode.RC522 - RFID..
Description: This RFID Board is designed for reading the tag data from 125KHz compatible tags/cards. It reads EM4100 family transponder tags that are brought in proximity to the external antenna and outputs the unique tag identification number via TX pin or the Wiegand pins (as per SEL pin configura..
Description: This module comes with μRFID Reader Module presoldered on the Base Board. It provides TTL and RS232 interfaces for the RFID
module. Module can be powered either via USB, DC barrel jack or the RMC
connector provided onboard. The detected tag data can be read over DB9 connector (RS-23..
Description: This module comes with µRFID Reader Module presoldered on the Base Board. It provides TTL, RS232 and USB interfaces for the RFID
module. Module can be powered either via USB, DC barrel jack or the RMC
connector provided onboard. The detected tag data can be read over DB9 connector ..
Description: This RFID Base Board
is compatible with EM-18, μRFID modules and other modules with
similar pinouts. It provides a TTL and an RS232 interface for the RFID
module. Module can be powered either via USB, DC barrel jack or the RMC
connector provided onboard. The detected tag data is..
Description: This RFID Access Control Shield transforms your Arduino to an access control device. It comes with ID-3LA Reader Module presoldered on to the shield. This shield includes almost everything that an access control system requires. Onboard Relay driving circuitry helps your Arduino to cont..