Description: This module comes with µRFID Reader Module presoldered on the Base Board. It provides TTL, RS232 and USB interfaces for the RFID
module. Module can be powered either via USB, DC barrel jack or the RMC
connector provided onboard.
The detected tag data can be read over DB9 connector (RS-232), USB port or the RMC pins (TTL Serial out or Wiegand 26 out, as per selection).
The base board can be connected to the USB port of a PC with the CP2102
driver installed, allowing Windows applications to communicate with
the Reader module via allocated COM port. As the board comes with appropriate μRFID module fitted, it is a complete “ready-to-use” RFID system
which can be used for evaluation purposes. It can also be used
as an embedded board in application circuits of access control systems
and all for in-circuit evaluation.
Jumper Connections:
J1
| Power Selection between DC input and USB
|
J2
| Output format selection (Short - WIEGAND 26, Open - Serial TTL, USB & RS-232) |
Features:- Onboard µRFID reader module
- Operating frequency 125kHz
- Current Rating < 50mA
- Reading distance 10–15 cm
- Communication parameters 9600bps, 8-N-1
- Supports Tags which work at 125kHz
- USB, RS232 (DB9) and TTL Interfaces for serial RFID data
- Jumper Selection for output format: Serial & Wiegand 26
- Wiegand 26 output pins brought out on board
- DPDT slide switch to select between USB and DB9 output
- LEDS for visual status indication; Power and Tag Detection
- Audio alert on tag detection
- Multiple options for powering; via USB port, DC barrel jack or RMC connectors
- 5V on board regulation for DC power input
- Fuse protection when USB powered
- DC voltage input: 7~9V
Dimensions:- Length: 80mm
- Width: 47mm
- Height: 14mm
Package Includes:- 1 x μRFID with Base Board (RS232,USB,TTL)
- 2 x Jumpers - 2.54mm
Resources:
There are currently no any reviews about this product.
There are currently no any question about this product.
