SX1262 LoRa HAT 868MHz Frequency Band for Raspberry Pi

(0) 0 out of 5 stars Write reviewReport bug
  • Part No :
  • WRL-3746
  • Availability:
  • In Stock
  • Shipping :
  • Same Day*
  • Weight:
  • 0.08Kg
  • Made By:
  • Waveshare
  • Mfr.Part.No:
  • 16806
  • Quality Rank:
  • 95/100
Rs 2088
(Excluding GST.)
Rs 2464
(Including GST)
2464 New In Stock
  • Buy & earn 209  reward points
  • GST Invoice & Input Credit Available
Quantity :

This is a Raspberry Pi LoRa HAT based on SX1262, covers 868MHz frequency band. It allows data transmission up to 5km through serial port. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.

Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.

Note: Raspberry Pi boards shown in the photos is NOT included in the package.


  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • Onboard CP2102 USB TO UART converter, for serial debugging
  • Brings the UART control interface, for connecting host boards like Arduino/STM32
  • 4x LED indicators, easy to check the module status
  • LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more
  • robust to interference
  • Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region
  • Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications
  • Customizable communication key which won't be retrieved, greatly improves the security of user data
  • Supports LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment
  • Supports RSSI signal intensity indicating, for evaluating signal quality, tuning the network
  • Supports wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter
  • Supports fixed-point transmission, broadcast, signal channel monitor
  • Comes with development resources and manual (examples for Raspberry Pi/STM32)

What's on Board:

  • SX1262 LoRa module
  • 74HC125V: voltage level translator
  • CP2102: USB TO UART converter
  • Raspberry Pi GPIO connector: for connecting with Raspberry Pi
  • USB TO UART port
  • UART header: for connecting host boards like STM32/Arduino
  • SMA antenna connector
  • PEX antenna connector
  • Indicators:
    • RXD/TXD: UART RX/TX indicator
    • AUX: auxiliary indicator
    • PWR: power indicator
  • UART selection jumpers
    • A: control the LoRa module through USB TO UART
    • B: control the LoRa module through Raspberry Pi
    • C: access Raspberry Pi through USB TO UART
  • LoRa mode selection jumpers
    • short M0, short M1: transmission mode
    • short M0, open M1: configuration mode
    • open M0, short M1: WOR mode
    • open M0, open M1:deep sleep mode


  • RF module: SX1262
  • Frequency band: 850.125 ~ 930.125MHz
  • Radio rate: 0.3kbps ~ 62.5kbps (programmable)
  • Transmit power: 22.0dBm (10/13/17/22dBm programmable)
  • Receive sensitivity: -147dBm (radio rate 2.4kbps)
  • Power consumption:
    • Transmit current: 133mA (transient consumption)
    • Receive current: 11mA
    • Sleep current: 2uA (LoRa module software shutoff)
  • Communication interface: UART (TTL level)
  • Baudrate: 1200bps ~ 115200bps (9600bps by default)
  • Packet length: 240 Byte (32/64/128/240 Byte programmable)
  • Cache: 1000 Byte
  • Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)
  • Power supply: 5V
  • Logic level: 3.3V/5V
  • Operating temperature: -40~85 degree C

Dimensions: 7cm x 12cm x 2cm

Package Includes:

  • 1x SX1262 868M LoRa HAT
  • 1x USB type A plug to micro plug cable
  • 1x 868MHz antenna

Development Resources:

Sort by: Recently  /  Helpful Write review

There are currently no any reviews about this product.

There are currently no any question about this product.

Ask a question about SX1262 LoRa HAT 868MHz Frequency Band for Raspberry Pi

Report issue about the SX1262 LoRa HAT 868MHz Frequency Band for Raspberry Pi

Ask a question about the SX1262 LoRa HAT 868MHz Frequency Band for Raspberry Pi

Report issue about the SX1262 LoRa HAT 868MHz Frequency Band for Raspberry Pi

Request price match for the SX1262 LoRa HAT 868MHz Frequency Band for Raspberry Pi

Found this item with same quality and at a lower price but prefer to buy from

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

SX1262 LoRa HAT 868MHz Frequency Band for Raspberry Pi