GPS Receiver with Antenna (5V TTL SERIAL)

(1) 5 out of 5 stars Report bug

Part No :
GPS-2261
Availability:
Out of Stock
Shipping :
Same Day*
Weight:
0.05Kg
Made By:
rhydoLABZ
Mfr.Part.No:
GPS-2261
Quality Rank:
100/100
Warranty:
1 Month

Rs 1775

(Excluding GST.)

Rs 2095

(Including GST)

Buy & earn 178 reward points
GST Invoice & Input Credit Available

Description: GPS TTL Mini is a high gain GPS Receiver . The on board 3V3 to 5V level convertor enable us to directly interface with normal 5V Microcontrollers. The module is made with ultra small High gain third generation POT (Patch Antenna On Top) GPS module. There is no prior configuration required; just power the module with 5V, and your data (NMEA 0183) is ready at TX pin. It has a very compact and easy to integrate design with the ultimate tracking performances. It can be directly connected to Microcontroller’s UART.

The GPS chipsets inside the module are designed by MediaTek Inc., which is the world’s leading digital media solution provider and largest fab-less IC company in Taiwan. The module can support up to 66 channels. The GPS solution enables small form factor devices. They deliver major advancements in GPS performances, accuracy, integration, computing power and flexibility. They are designed to simplify the embedded system integration process.

Features:

MediaTek MT3329 Chipset, L1 Frequency, C/A code, 66 Channels
TTL asynchronous serial interface
5 VDC supply @ 55 mA (typical)
Data output Baud rate: 9600 bps(Default)
Standard NMEA0183 output format
Low Power Consumption: 55mA @ acquisition, 40mA @ tracking
High Sensitivity, -165 dBm, TCXO Design , superior urban performances
Position Accuracy: <3.0M 2D-RMS
DGPS (WAAS/EGNOS/MASA/GAGAN) Support
Multi-path Compensation ; E-GSM-900 Band Rejection
Cold Start is Under 36 seconds (Typical)
Warm Start is Under 34 seconds (Typical)
Hot Start is Under 1 second (Typical)
Max. Update Rate : 10Hz (Default: 1 Hz)

Package includes:

1x GPS TTL Mini
1x Berg Strip-Straight (1x4)
1x Berg Strip-Right angled (1x4)

Documents & Downloads:

Sort by: Recently / Helpful

By vivekanand dhakane from N/A on February 24, 2016

is this module compatible with arduino? Can I use arduino's tiny GPS library for this module?

4 of 6 people found this review helpful

Was this review helpful to you? Yes No

- Q
- I want to change the default update rate of the GPS module. How to do it?? please help me.
  asked by Aadityaraj Shinde on March 01, 2017
- A
- By using PMTK command we can change the update rate of GPS module.
  
  Packet Type: 220 PMTK_SET_NMEA_UPDATERATE
  
  Packet Meaning: Set NMEA port update rate
  
  Data Field:
  Position fix interval (millisecond). The possible interval values range between 100 and 10000 millisecond.
  
  Example:
  $PMTK220,1000*1F
  $PMTK220, 200*2C
  $PMTK220,100*2F
  
  1000(millisecond) = 1(sec) 1/1 = 1Hz
  200(millisecond) = 0.2(sec) 1/0.2 = 5 Hz
  100(millisecond) = 0.1(sec) 1/0.1 = 10 Hz
- Q
- Can it be used with Raspberry pi 3 model B?
  Any documentation/instructions available?
  asked by Muhammed Basil on September 27, 2017
- A
- GPS Receiver with Antenna (5V TTL SERIAL) can be used with Raspberry pi 3 model B. Kindly go through the link below for more details.
  https://www.rhydolabz.com/wiki/?p=9557

Request price match for the GPS Receiver with Antenna (5V TTL SERIAL)

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.