Menu
Your Cart
Dear Valued Customers: We're excited to announce our move to a new website!  Existing Customers, kindly utilize the 'Forgot Password' option to update the Password. Thank you for your cooperation!

Bluetooth Mate Silver (Sparkfun USA)

Bluetooth Mate Silver (Sparkfun USA)
Bluetooth Mate Silver (Sparkfun USA)
Bluetooth Mate Silver (Sparkfun USA)
Bluetooth Mate Silver (Sparkfun USA)
Bluetooth Mate Silver (Sparkfun USA)
Bluetooth Mate Silver (Sparkfun USA)
Bluetooth Mate Silver (Sparkfun USA)
Bluetooth Mate Silver (Sparkfun USA)
Bluetooth Mate Silver (Sparkfun USA)
  • Stock: Out Of Stock
  • Brand: Sparkfun - USA
  • Model: WRL-3701
  • Weight: 0.10kg
  • MPN: WRL-12576
Rs 1,949

Bluetooth Mate Silver is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for serial cables. Any serial stream from 2400 to 115200bps can be passed seamlessly from computer to the target.

Bluetooth Mate has the same pin out as the FTDI Basic, and is meant to plug directly into an Arduino Pro, Pro Mini, or LilyPad Mainboard. The RN-42 is perfect for short range, battery powered applications. The RN-42 uses only 26uA in sleep mode while still being discoverable and connectable. Multiple user configurable power modes allow the user to dial in the lowest power profile for a given application.

The Bluetooth Mate has on-board voltage regulators, so it can be powered from any 3.3 to 6VDC power supply. We’ve got level shifting all set up so the RX and TX pins on the remote unit are 3-6VDC tolerant. Do not attach this device directly to a serial port. You will need an RS232 to TTL converter circuit if you need to attach this to a computer.

Note: The hardware reset pin of the RN-42 module is broken out on the bottom side of the board. This pin is mislabeled as ‘PIO6’, it is actually PIO4. Should you need to reset the Mate, pull this pin high upon power-up, and then toggle it 3 times.

Features of Sparkfun Bluetooth Mate Silver

  • v6.15 Firmware
  • Designed to work directly with Arduino Pro’s and LilyPad main boards
  • FCC Approved Class 2 Bluetooth® Radio Modem!
  • Low power consumption : 25mA avg
  • Hardy frequency hopping scheme - operates in harsh RF environments like WiFi, 802.11g, and Zigbee
  • Encrypted connection
  • Frequency: 2.402~2.480 GHz
  • Operating Voltage: 3.3V-6V
  • Serial communications: 2400-115200bps
  • Operating Temperature: -40 ~ +70C
  • Built-in antenna
  • Board: 1.75x0.65"

Package includes:

  • 1 x Sparkfun Bluetooth Mate Silver

Development resources:

Write a review

Please login or register to review