GSM/GPRS Shield - SIM800 - rhydoLABZ

(1) 5 out of 5 stars Report bug

Part No :
GSM-2023
Availability:
In Stock
Shipping :
Same Day*
Weight:
0.2Kg
Made By:
rhydoLABZ
Mfr.Part.No:
GSM-2023
Quality Rank:
100/100

Rs 1399

(Excluding GST.)

Rs 1651

(Including GST)

Buy & earn 140 reward points
GST Invoice & Input Credit Available

Quantity :

Got Better Price

Introducing rhydoLABZ GSM/GPRS Shield, an all-in-one SIM800 shield that lets you add voice, text/SMS, data connectivity and Bluetooth to your arduino project in an easy to use manner. With right program running, you could just plug and play as it has got an arduino form-factor. It is built with a stamp sized Quad Band GSM/GPRS engine - SIM900, works on frequencies 850/ 900/ 1800/ 1900 MHz. This shield fits on top of any classic Arduino or compatible, and packs a surprising amount of technology into it's little frame. This module can do just about everything.

The GSM/GPRS Modem is having internal TCP/IP stack to enable you to connect with internet via GPRS. The shield is manufactured with Automatic Pick and place machine to meet the high quality standards. On its own, this shield can't do anything. It requires a microcontroller like an Arduino to drive it! Additionally a SIM Card with cellular connectivity! The shield can be powered either via Arduino or directly over RMC connector. You can grab some stacking headers from our store, if you would like to stack a shield on top.

The shield design is compatible with the older Arduino footprint as well as the new R3 footprint, which means that this shield is totally compatible with most of the Arduino Boards. That includes most popular Uno to the veteran Duemilanove. It also supports 3V3 boards such as Arduino Due, with onboard level shifting buffer gates. The shield can also used with Arduino Mega and Leonardo but the serial communication feature via software pins wont be available for these two boards, still that wont affect the functionality of the shield as they can be communicated over the hardware serial pins.

These shields are manufactured with Automatic Pick and Place Machine for high quality standard. The shield itself is high quality PTH PCB with professionally designed circuitry. The onboard low dropout 3A power supply allows you to connect wide range unregulated power supply (7V-12V), also withstands the peak current draw that occurs during network scanning. The onboard level shifting circuitry is designed using buffer gates for added reliability. We have also considered optional customization as per users convenience, for which the design includes onboard PCB jumpers.

Features:

AT command interface
Quad-band 850/900/1800/1900MHz
Make and receive voice calls
Send and receive SMS messages
Send and receive GPRS data (TCP/IP, HTTP, etc.)
Bluetooth connectivity, option for connecting chip antenna.
Configurable Baud rate (9600-115200, factory default value: 9600)
Standard Audio Jack Connectors for external speaker and mic
Selectable interface between hardware serial port and software serial port
Inbuilt Powerful TCP/IP protocol stack for internet data transfer over GPRS.
Level shifting circuitry to make it Arduino-safe
SMA Commector with external antenna
Indicator LEDs for Power, Netlight and Status
Standard Flap type SMA Socket
ESD Protection over TVS Zener array
Seperate Reset switches for both Arduino and the sheild
Slide switch to swap the shield between Arduino and PC
Provision to select between hardware and software serial ports

Specification:

Input Voltage: 7V - 12V DC
Normal operation temperature: -20 °C to +55 °C
Current: 60mA @ 9V
Dimensions: 69.5x53.5 (MM)

Note: For more details, kindly refer the wiki page.

Package Includes:

1x GSM/GPRS Shield - SIM800
1x Duck type antenna
1x 2 Pin Female RMC connector (2mm)

Resources:

NOTE: FM Functionality is not available with this version of SIM800

Sort by: Recently / Helpful

Great spec

By William from South Carolina, United States on April 26, 2016

Quad band gsm with built in Bluetooth.

0 of 4 people found this review helpful

Was this review helpful to you? Yes No

- Q
- Will this work with node mcu?
  asked by Shourya Roy on September 03, 2018
- A
- Yes, GSM/GPRS Shield - SIM800 will work in node mcu.
- Q
- How can I connect the same with a laptop/PC ? Also, I request you to ship this product as soon as possible.
  
  asked by Prabhat Gupta on May 23, 2016
- A
- You can plug in the shield to a UNO board, and place the dpdt slide switch to USB. Then connect the arduino to your PC's USB port. You can use the arduino board without a controller, if the controller is mounted make sure that its not giving out any data on its UART.
  
  Using an Arduino board would be the most convenient method. Otherwise you could also use a converter board to connect the TTl pins of the shield to your PC's serial or USB port.
- Q
- Can this be used with Raspberry Pi?
  asked by My Pi on May 08, 2017
- A
- This GSM/GPRS Shield - SIM800 is designed for arduino board. It is totally compatible with Arduino Boards. GSM / GPRS Quad Band TTL UART Modem - SIM800 can be used with Raspberry Pi. Please find the rhydolabz-wiki link shown below , for the same which definitely will shed light on this regard.
  
  https://www.rhydolabz.com/wiki/?p=10450
- Q
- Does this sheild support 4g volte sim??
  asked by bevan dsouza on September 15, 2017
- A
- GSM/GPRS Shield - SIM800 support 4G sim but only get 2G speed.

Request price match for the GSM/GPRS Shield - SIM800 - rhydoLABZ

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.