Menu
Your Cart
Dear Valued Customers: We're excited to announce our move to a new website!  Existing Customers, kindly utilize the 'Forgot Password' option to update the Password. Thank you for your cooperation!

Air Quality Sensor - SGP30 (Qwiic) - SparkFun USA

Air Quality Sensor - SGP30 (Qwiic) - SparkFun USA
Air Quality Sensor - SGP30 (Qwiic) - SparkFun USA
Air Quality Sensor - SGP30 (Qwiic) - SparkFun USA
Air Quality Sensor - SGP30 (Qwiic) - SparkFun USA
Air Quality Sensor - SGP30 (Qwiic) - SparkFun USA
Air Quality Sensor - SGP30 (Qwiic) - SparkFun USA
Air Quality Sensor - SGP30 (Qwiic) - SparkFun USA
Air Quality Sensor - SGP30 (Qwiic) - SparkFun USA
Air Quality Sensor - SGP30 (Qwiic) - SparkFun USA
This product qualifies for free shipping
Exciting news! Orders over 1999/- now get free shipping. Happy shopping with complimentary shipping!
  • Stock: In Stock
  • Brand: Sparkfun - USA
  • Model: SEN-3737
  • Weight: 0.01kg
  • MPN: SEN-16531
Rs 2,149

The SGP30 Air Quality Sensor provides information on the quality of the air in your room or house by monitoring the volatile organic compounds around the sensor. The SGP30 Air Quality Sensor can return valid indoor air quality (IAQ) readings within 15 seconds of powering up! By comparison, typical air quality (IAQ) sensors are great for measuring CO2 and volatile organic compounds (VOCs) but some of them require a burn-in time of 48 hours and a 20-min start up time. Along with a very quick start-up time, the SGP30 is very resistant to contamination from other gases to ensure low drift and long-term stability for extremely reliable results. You can read the SGP30 gas sensor output measurements of total VOCs (TVOC) in parts per billion (ppb), carbon dioxide (CO2) equivalent in parts per million (ppm) and H2.

The SGP30 communicates via I2C so naturally we broke out the pins on the sensor to Qwiic connectors so you can easily connect it to SparkFun's ever growing Qwiic Ecosystem!

The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.

                        Get Started with the SGP30 Air Quality Sensor Guide

Features:

  •     Uses I2C interface (Qwiic-enabled)
  •         I2C Address: 0x58
  •         2x Qwiic Connectors
  •     Operating voltage range
  •         1.62V - 1.98V (Typ. 1.8V)
  •         Regulated to 1.8V from a 3.3V source if using the Qwiic cable
  •     TVOC Output Signal
  •         Output range: 0 ppb to 60,000 ppb
  •         Resolution: Avg. 13 ppb. Refer to datasheet for specifics
  •     CO2 Output Signal
  •         Output range: 400 ppm to 60,000 ppm
  •         Resolution: Avg. 11ppm. Refer to datasheet for specifics
  •     Ethanol Signal
  •         Measurement Range: 0 ppm to 1,000 ppm
  •         Accuracy: Typ. 15% of meas. value
  •         Resolution: 0.2% of meas. value
  •     H2 Signal
  •         Measurement Range: 0 ppm to 1,000 ppm
  •         Accuracy: Typ. 10% of meas. value
  •         Resolution: 0.2% of meas. value
  •     Typical current consumption (varies based on mode)
  •         48.2 mA Typ. (Measurement Mode)
  •         2µA (Typ.) to 10µA (Sleep Mode)

Documents:

Write a review

Please login or register to review