Dagu - Wild Thumper High Power Switch

(0) 0 out of 5 stars Report bug

Part No :
ROB-2215
Availability:
In Stock
Shipping :
Same Day*
Weight:
0.05Kg
Made By:
Dagu
Mfr.Part.No:
RS003HP
Quality Rank:
100/100
Warranty:
1 Month

Rs 1299

(Excluding GST.)

Rs 1533

(Including GST)

Buy & earn 130 reward points
GST Invoice & Input Credit Available

Quantity :

Got Better Price

Description: This is the "High Power Switch" from DAGU. Originally designed for the "Wild Thumper" robot chassis's it is a very versatile switch that can be used with any robot that draws more than the 2-3A that most small switches can handle.

This switch will work with batteries from 6V to 24V with a maximum voltage of 32V so you can charge your 24V batteries without damaging the switch. Without any heatsinking this switch will handle 10A easily. Mounted on a CPU heatsink with heat transfer compound and a cooling fan and this switch will handle up to 60A continuous!! The FET's are fully insullated to simplify mounting requirements. To make the switch as robot friendly as possible we have now added a socket for an external manual switch. This allows another switch to be more conveniently mounted. Simply leave the on-board switch in the "off" position.

A digital input allows the switch to be controlled by a processor. Simply connect the grounds and apply a voltage of at least 1V to the digital input to turn the switch on. This gives a robot the ability to turn itself off after recharging it's battery.The Wild Thumper High Power Switch is an accessory that conveniently cuts power supply from the LiPo battery.

The differentiating part about this accessory is that it is designed to handle the High Currents that pass between the LiPo and the High Power H bridge in the Wild Thumper (2 x 15A). The switch is designed to protect both the LiPo and the Electronics.

Specifications:

Battery voltage: 6V -20V
Current rating: 10A continuous - No heat-sink
Current rating: 30A continuous - Chassis used as heat-sink with heat transfer compound.
Current rating: 60A continuous - Heavy duty heat-sink, fan and heat transfer compound.

Documents:

Note: If the current passing through the switch will be Higher than 10A, the switch should be mounted on the Heat sink.

Sort by: Recently / Helpful

There are currently no any reviews about this product.

There are currently no any question about this product.

Request price match for the Dagu - Wild Thumper High Power Switch

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.