Menu
Your Cart
Dear Valued Customers: We're excited to announce our move to a new website!  Existing Customers, kindly utilize the 'Forgot Password' option to update the Password. Thank you for your cooperation!

L9110 Motor Control Driver

L9110 Motor Control Driver
L9110 Motor Control Driver
L9110 Motor Control Driver
L9110 Motor Control Driver
L9110 Motor Control Driver
L9110 Motor Control Driver
L9110 Motor Control Driver
L9110 Motor Control Driver
L9110 Motor Control Driver
  • Stock: Out Of Stock
  • Brand: Chineese
  • Model: ROB-2915
  • Weight: 0.04kg
  • MPN: L9110_Dual_Driver
Rs 199

L9110 Motor Control Driver is a dual channel motor driver controller board, which can control two DC motors, or a single four-wire two-phase stepper motor. The circuit uses the L9110 (HG7881) integrated circuits (IC), which consist of H-Bridge drivers.

The L9110S IC has TTL / CMOS compatible I/O, which interfaces with Arduino and Raspberry Pi computer boards. A minimum of 2.5 V is required to represent a high logic at the inputs IA and IB. The voltage that you provide to power the IC is the same as that which powers the motor. Hence, this IC operates on a wide supply range (Vcc) from 2.5 V to 12 V. If you were to be using 6 V motors, then obviously, that is the voltage to provide the IC.

This IC provides up to 800 mA continuous drives current to drive a load, however it does not have a heatsink, making it more suitable for low power loads. If you draw more current through it, then it will start to heat up and smoke. Its maximum operating temperature is 80 ºC, and power dissipation is critical.

It has a rated peak current of 1.5 A to 2.0 A, however, this is fine for short bursts only, and maintaining it for any length of time will probably result in damage to the IC.

An advantage of this IC is that it has built-in clamping diodes for back EMF protection, which eliminates the external component count to only the IC and motor.

Features:

  • Operating voltage : +2.5V ~ +12V
  • Onboard dual L9110S chipset motor driver
  • TTL / CMOS output level compatible
  • Driving Current : 800mA (per channel)
  • Peak Output Current: 2A (per channel)
  • Drive for two DC motors or a 4-wire 2-phase stepper motor
  • Operating temperature: 0 °C-80 °C
  • Output built-in clamp diodes for inductive load

Dimensions:

  • Length: 25 mm
  • Width: 20 mm

Package Includes:

  • 1 x L9110 Motor Control Driver

Resources:

Write a review

Please login or register to review