Description: The ARM LPC2138 Quick Start Board is a Low Cost ARM Development Board that can be used to quickly evaluate and demonstrate the capabilities of NXP LPC2138 (ARM7TDMI) microcontroller. The QsLPC2138 board is designed to work as a Project board with access to all Port pins for external connection. The ARM LPC2138 Quick Start Board consists of a base board and a header board with microcontroller. The ARM Development board is populated with optimum components and is ideally suitable for Students as well as professionals.
Base Board Features:
- Compact and Ready to use design
- Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
- High Quality Two layer PTH PCB
- Supports ARM LPC2132 / LPC2138 / LPC2129 / LPC2148* Header Boards
- Includes ARM LPC2138 Header Board
- No separate programmer required (On-Chip Boot loader)
- No Separate power adapter required (USB power source)
- Screw terminal for External power Supply
- Power Supply range of 7V to 20V
- RS-232 Interface (MAX3232) for direct connection to PC’s serial port (COM 0)
- On Board TTL to RS232 Converter (COM 1)
- On Board Power LED Indicator
- On Board LED Connected via Jumper to I/O pin
- On Board Reset button
- All Port Pins available at Berge Strip and at Round Machine-cut female connector
- On Board ARM JTAG Connector for Debugging/Programming
- Can be used as header board for developing applications
- Power Supply Reverse Polarity Protection
- On Board 1 Amp Voltage Regulator
- On Board Connector for regulated 3V3 output for your application
LPC2138 Header Board Features:
- Easy to use DIP Package
- Includes ARM LPC2138 Microcontroller
- On Board Power LED Indicator
- On Board ARM JTAG Jumper
- On Board 10 MHz Crystal Oscillator
- On Board 32.768 KHz Crystal for RTC
- On Board 3.3V Regulator
- On Board Power Supply de-Coupling Capacitors
- All Port Pins available at Berge Strip
- Header Module can be removed for developing your circuit
LPC2138 Chip Specification:
- NXP LPC2138 with 10 MHz Crystal Oscillator (With Boot loader Software)
- High Performance 32-bit ARM7TDMI-S™ CPU
- 512 KB Programmable Flash Memory provides minimum of 10,000 erase/write cycles and 10 years of data-retention.
- 32 KB Data Memory (SRAM)
- In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software.
- Single Flash sector or full chip erase in 400 ms and 256 bytes programming in 1 ms.
- EmbeddedICE and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor™ software and high speed tracing of instruction execution.
- Two 8-channel 10-bit A/D with conversion times as low as 2.44 us per channel.
- Single 10-bit D/A converter provide variable analog output.
- Two 32-bit Timers/External event counters.
- Four Capture and four Compare channels.
- PWM unit with six output pins.
- Low power Real-time clock with independent power and dedicated 32 kHz clock input.
- Multiple serial interfaces including two UARTs, two Fast I2C (400 kbit/s), SPI™ and SSP with buffering and variable data length capabilities.
- Vectored interrupt controller with configurable priorities and vector addresses.
- Up to 47 of 5 V tolerant general purpose I/O pins.
- Up to nine edge or level sensitive external interrupt pins.
- 60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop (PLL) with settling time of 100us.
- On-chip integrated oscillator operates with external crystal in range of 1 MHz to 30 MHz or with external oscillator from 1 MHz to 50 MHz.
- Power saving modes include Idle and Power-down.
- Individual enable/disable of peripheral functions.
- Processor wake-up from Power-down mode via external interrupt or Real-time Clock.
- Single power supply chip with Power-On Reset (POR) and Brown-Out Detection (BOD:
- CPU Operating Voltage range of 3.0 V to 3.6 V
Package Includes:
- 1x Fully Assembled and Tested ARM LPC2138 Quick Start Board
- 1x LPC 2138 ARM7TDMI
- 1x RS232 Serial Cable
- 1x USB cable ( To Power The Board )
- 5x Jumpers - 2mm
- 4x Spacers
- 8x Screws
- 1x 2 Pin RMC Female connector with wire (2mm pitch)
- 1x Software CDROM with
- User Manual
- Schematic
- Programming Software
- Sample Hex Code
- Example Codes
- Datasheet
- Development Environment (IDE)-Evaluation Version
- C Compiler (Evaluation Version)
Downloads:
There are currently no any question about this product.
