Quantity in Cart: 0
Touch is supported in desktop windows and Linux os?
Raspbian OS (Linux) and the latest version of Windows 10 IOT is built to support touch input. We have tested this display with Raspbian OS only, not Windows.
Let me know which one is correct and is it capacitive touch.
Resolution for this display (7INCH HDMI LCD (C)) is 1024x600.
And it is capacitive touch
The display not showing any touch response. I think the problem is with the Raspbian. How could I fix this?
To get the issue fixed, follow the below mentioned procedure.
Download the image, Raspbian, from Raspberry Pi web site.
Write the image to a TF card and put it on the pi and power on the device.
After the booting(which will take some minutes) open the LX terminal and type,
sudo nano /boot/config.txt and press the enter key.
Add the code shown below to the end of file;
hdmi_cvt 1024 600 60 6 0 0 0
Then press Ctrl+x and thus enter y to save the file.
Restart the RPi and connect the LCD to it.
What is the temperature range in which 7 inch capacitive Touch Screen for Raspberry Pi (1024x600) can operate?
7 inch Capacitive Touch Screen for Raspberry Pi (1024x600) module has an operating temperature in the range -20 ~ +70 degrees centigrade and storage temperature between -30 and +80 degrees centigrade
Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com? Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.
© Copyright 2016-2019 rhydoLABZ
One fine body