(0) 0 out of 5 stars Write reviewReport bug
  • Part No :
  • DEV-2259
  • Availability:
  • In Stock
  • Shipping :
  • Same Day*
  • Weight:
  • 0.1Kg
  • Made By:
  • Unknown
  • Quality Rank:
  • 100/100
  • Warranty:
  • 1 Month
Rs 5423
(Excluding GST.)
Rs 6399
(Including GST)
6399 New In Stock
  • Buy & earn 54  reward points
  • GST Invoice & Input Credit Available
Quantity :
Description: The Gertboard is an add-on GPIO expansion and experimenter board for Raspberry Pi. It comes with a large variety of components, including buttons, LEDs, A/D and D/A converters, a motor controller, and an Atmel ATmega328 AVR microcontroller which you can program using the standard Arduino IDE (with some minor modifications). The Gertboard was designed by Gert van Loo, hence the name!

Operation of the Gertboard is relatively straightforward. A ribbon cable connects the Raspberry Pi to the Gertboard. This is then broken out with a row of pins, so every GPIO signal is avalable for your use. Some of these pins can be directly jumper-ed via standard 2-pin jumper links to on-board functions – e.g. with a pair of 2-pin jumpers, the serial Rx and Tx can be connected directly to the ATmega’s Tx and Rx respectively, and with a few more 2-pin jumpers, the SPI pins can be jumper-ed to the Gertboard SPI peripherals. The other pins are available for your own use, or to connect to other devices on the Gertboard itself.

One important (and good!) point to note is that all these functions can be accessed from either the Raspberry Pi or the ATmega microcontroller, so you can use the Pi to command the ATmega if you need additional PWM outputs for example (The Pi only has one PWM output), or to use the analog inputs on the ATmega, and so on.

Kit Includes:
  • 1 x Fully Assembled Gertboard
  • 1 x Software CD (Open Source ARM Cortex M Dev Tools)
  • 10 x Female to Female Jumper Wires
  • 18 x On board Patch Clips
  • 6 x Plastic Stand Feet
  • Plugs directly onto Raspberry Pi GPIO socket
  • Motor controller, capable controlling a motor bi-directionally, delivering 18V and 2A maximum
  • Dual-channel D-to-A converter, 8-bit
  • Dual-channel A-to-D converter, 10-bit
  • Onboard Atmel ATmega328 MCU for running off-board programs which are written, compiled and uploaded to Gertboard from Raspberry Pi
  • 6 x open collector outputs
  • 12 x LED indicators
  • 3 x momentary push switches
  • 10 x strap cables included
  • 18 x jumpers included
Sort by: Recently  /  Helpful Write review

There are currently no any reviews about this product.

There are currently no any question about this product.

Ask a question about Gertboard

Report issue about the Gertboard

Ask a question about the Gertboard

Report issue about the Gertboard

Request price match for the Gertboard

Found this item with same quality and at a lower price but prefer to buy from

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.