Menu
Your Cart
Dear Valued Customers: We're excited to announce our move to a new website!  Existing Customers, kindly utilize the 'Forgot Password' option to update the Password. Thank you for your cooperation!

USB AVR Programmer (Pololu - USA)

USB AVR Programmer (Pololu - USA)
USB AVR Programmer (Pololu - USA)
USB AVR Programmer (Pololu - USA)
USB AVR Programmer (Pololu - USA)
USB AVR Programmer (Pololu - USA)
USB AVR Programmer (Pololu - USA)
USB AVR Programmer (Pololu - USA)
USB AVR Programmer (Pololu - USA)
USB AVR Programmer (Pololu - USA)
  • Stock: In Stock
  • Brand: Pololu - USA
  • Model: PRO-1551
  • Weight: 0.05kg
  • MPN: 1300
Rs 1,599
Description: This device is a programmer for AVR-based controllers. The programmer emulates an AVRISP v2 on a virtual serial port, making it compatible with standard AVR programming software. Two additional features help with building and debugging projects: a TTL-level serial port for general-purpose communication and a SLO-scope for monitoring signals and voltage levels. A USB cable and ISP cable are included.

The Pololu USB AVR Programmer is an extremely compact, low-cost in-system programmer (ISP) for Atmel’s AVR mirocontrollers, which makes this device an attractive programming solution. The USB AVR programmer connects to your computer’s USB port via an included USB A to mini-B cable and communicates with your programming software, such as AVR Studio or AVRDUDE, through a virtual COM port using the AVRISPV2/STK500 protocol. The programmer connects to your target device via an included 6-pin ISP programming cable (the older, 10-pin ISP connections are not directly supported, but it’s easy to create or purchase a 6-pin-to-10-pin ISP adapter). The programmer features upgradable firmware, allowing updates for future devices. It does not currently work with Atmel’s XMega line of microcontrollers.

The programmer is powered by the 5V USB power bus, and it is intended for programming AVRs that are running at close to 5 V (note that the programmer does not deliver power to the target device).

The programmer has been tested under Windows XP, Windows Vista, Windows 7, and Linux. This programmer  has also been tested with all Orangutan robot controllers and the 3pi Robot.



Bonus Features:
  • TTL-level serial port: The USB AVR programmer doubles as a USB-to-serial adapter, but with a few key improvements. The programmer installs as two virtual COM ports: one for communicating with programming software and one for the general-purpose USB-to-serial adapter. This means that you can seamlessly switch between programming an AVR and debugging it through the TTL serial port without having to open and close your terminal program. 
  • SLO-scope: This device can also act as a two-channel, severely limited oscilloscope (SLO-scope) using the A and B pins as analog voltage inputs and the Pololu SLO-scope application for Windows. The SLO-scope can measure voltages between 0 and ~5 V (the maximum is limited by the USB bus voltage), or higher if you use an external voltage divider, and it supports two sampling modes: 10 kHz sampling of two 8-bit analog inputs or 20 kHz sampling of one 7-bit analog input and one digital input. This feature can help you debug your circuits and firmware by seeing what the voltages are doing at various nodes. (Please note that the SLO-scope feedback is quite limited and is not intended as a substitute for a real oscilloscope or a good multimeter, which will have much higher input impedance, better resolution and range, and higher sampling frequency.)
Note: It does not support JTAG, DebugWire, or High-Voltage programming, and it does not support the Mac OS or older versions of Windows.

Package Contents:
  • 1x Pololu USB AVR Programmer
  • 1x 12" (30 cm) 6-pin ISP programming cable
  • 1x 6’ (1.8 m) USB A to mini-B cable.
Resources:

 

Write a review

Please login or register to review