Your Cart

Other Widgets

Model: SEN-3765 Brand: Waveshare
Overview   UART Fingerprint Sensor (D) Capacitive 360° Verification Nail plate-sized, UART commands operation Features: Based on a high performance Cortex processor, combined with high-security commercial fingerprinting algorithm, the UART Fingerprint Sensor (D) features functionali..
Rs 2,399.00
Model: MIS-3251 Brand: Waveshare
It’s an 8Ω 5W Speaker. Specifications: Impedance: 8Ω Power: 5W Dimension: 100mm x 45mm x 21 mm For use with: 5inch HDMI LCD (G) 5inch HDMI LCD (H) 7inch HDMI LCD (H) 10.1inch HDMI LCD (H) Package Includes: 1x 8Ω 5W Speaker..
Rs 449.00
Model: SEN-3756
This a high sensitivity vibration sensor mainly used for security detecting. This module features high sensitivity, fast response and excellent performance, and it is widely used to for security applications such as anti-theft system for vehicle.The sensor will output a low logic voltage when vibrat..
Rs 277.00
Model: SEN-3722 Brand: Waveshare
This is a small 1D/2D codes reader, by using the intelligent image recognition algorithm, it will decode the barcode or 2D code on paper or screen, fast and accurately. Through the onboard USB and UART interface, it can be directly plugged into a computer, or be easily integrated to kinds of device..
Rs 2,999.00
Model: WID-2508 Brand: Chineese
WTV-SR is one of the member of recording serial products. This module can record as well as fixed voice playback, recording content uploaded and a variety of control modes can be chosen. With the master chip and plug-in SPI-FLASH, it has a great advantage in the duration time of recording and cost p..
Rs 0.00
Model: DEV-3349 Brand: Sparkfun - USA
The SparkFun ATECC508A Cryptographic Co-processor Breakout allows you to easily add strong authentication security to your IoT node, edge device, or embedded system. It includes two Qwiic ports for plug and play functionality. Utilizing handy Qwiic system, no soldering is required to connect it to t..
Rs 479.00
Model: DEV-3345 Brand: Sparkfun - USA
The SparkFun Qwiic OpenLog is the smarter and better looking cousin to the extremely popular OpenLog but now ported the original serial based interface to I2C! Thanks to the added Qwiic connectors, you can daisy chain multiple I2C devices and log them all without taking up your serial port. The Qwii..
Rs 1,499.00
Model: INT-3695 Brand: Sparkfun - USA
The SPI Buffer Saver is a hardware solution to an interesting problem. In short the standard Arduino SPI library includes a method to transfer out an array (or buffer) but the contents are replaced by whatever data is on the MOSI line at that time. This is problematic when using the SPI hardware to ..
Rs 449.00
Model: INT-3694 Brand: Sparkfun - USA
Sometimes we want our projects on, but sometimes we want to turn them off for a while to save power. The SparkFun Nano Power Timer will run while only consuming minimal power (approximately 35nA) and turn your project on after a set amount of time. When you are done polling your sensors, posting dat..
Rs 499.00
MP3 Trigger - Sparkfun USA
-41 %
Model: WID-3703 Brand: Sparkfun - USA
The MP3 Trigger board is built to make MP3 sound integration easier than ever. The board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a full-duplex serial control port that provides full transport control, remote triggering for up to 256 tracks, and fast real-..
Rs 1,999.00 Rs 3,399.00
Model: PRT-3302 Brand: Sparkfun - USA
The SparkFun TSH82 Configurable OpAmp Board was designed to give the best combination of performance and flexibility that could be achieved by giving two gain stages, each one independently accessible on the header pins. Each stage is natively configured as an inverting amplifier that can also be st..
Rs 399.00
Model: PRT-3303 Brand: Sparkfun - USA
The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analog converter (DAC), which converts I2S  audio to an analog signal to drive speakers. The I2S Audio Breakout converts the digital audio signals using the I2S standard to an analog signal and amplifies the signal using a class D a..
Rs 449.00
Model: WID-3702
Description : R307 fingerprint module is a finger print sensor with TTL UART interface. The user can store the fingerprint data in the module and can configure it in 1:1 or 1: N mode for identifying the person. The FP module can directly interface with 3.3 or 5v Microcontroller. A level converter (l..
Rs 1,199.00
Model: WID-2588 Brand: Sparkfun - USA
Sunny Buddy is a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel or other photovoltaic device and into a rechargable LiPo battery. Set-up is easy as well, jus..
Rs 2,599.00
Model: WID-2584 Brand: Sparkfun - USA
The MMC/SD Card Breakout Board is used for mass storage and datalogging. This breakout board will allow you to breakout the SD/MMC socket to a standard.1" 10-pin header.Perfect for breadboarding. It can be directly controlled by a wide range of microcontrollers. specifications of SD/MMC Card Breako..
Rs 499.00
Showing 1 to 15 of 73 (5 Pages)