Pololu 9V Step-Up Voltage Regulator U3V12F9 switching step-up (or boost) voltage regulator takes input voltage as low as 2.5 V and efficiently boosts to 9 V. The pins have a 0.1" spacing, making this board compatible with standard solderless breadboards and perfboards. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 80% to 90%. The available output current is a function of the input voltage, output voltage, and efficiency but the input current can typically be as high as 1.4 A. The input voltage VIN must be at least 2.5 V and should not exceed the output voltage VOUT.
The boost regulator has three connections: input voltage (VIN), ground (GND), and output voltage (VOUT).
Features of Pololu 9V Step-Up Voltage Regulator U3V12F9:
- input voltage: 2.5 V – VOUT
- fixed 5 V, 9 V, or 12 V output with 4% accuracy
- 1.4 A switch allows for input currents up to 1.4 A
- 2 mA typical no-load quiescent current
- integrated over-temperature shutoff
- small size: 0.515" × 0.32" × 0.1"
Dimensions of Pololu 9V Step-Up Voltage Regulator U3V12F9:
- Size: 0.32" × 0.515" × 0.1"
- Weight: 0.4 g
Notes:Regulator may overheat at lower input currents when VIN is much lower than VOUT. Available output current is a function of VIN, VOUT and the regulator efficiency.
There are currently no any reviews about this product.
There are currently no any question about this product.