Menu
Your Cart

μRFID with Base Board (RS232, TTL) - rhydoLABZ

μRFID with Base Board (RS232, TTL) - rhydoLABZ
μRFID with Base Board (RS232, TTL) - rhydoLABZ
μRFID with Base Board (RS232, TTL) - rhydoLABZ
μRFID with Base Board (RS232, TTL) - rhydoLABZ
μRFID with Base Board (RS232, TTL) - rhydoLABZ
μRFID with Base Board (RS232, TTL) - rhydoLABZ
μRFID with Base Board (RS232, TTL) - rhydoLABZ
μRFID with Base Board (RS232, TTL) - rhydoLABZ
μRFID with Base Board (RS232, TTL) - rhydoLABZ
  • Stock: In Stock
  • Brand: rhydoLABZ
  • Model: RFID-2587
  • Weight: 0.05kg
  • MPN: RFID-2587
Rs 549.00
(Excluding GST)
This module comes with μRFID Reader Module presoldered on the Base Board. It provides TTL and RS232 interfaces for the RFID module. Module can be powered either via USB, DC barrel jack or the RMC connector provided onboard.



The detected tag data can be read over DB9 connector (RS-232) or the RMC pins (TTL Serial out or Wiegand 26 out, as per selection). The base board can be connected to the serial port of a PC over the DB9 connector, allowing the Windows applications to communicate with the Reader module via the allocated COM port. The board comes with appropriate μRFID module fitted and it is a complete “ready-to-use” RFID system which can be used for evaluation purposes. It can also be used as an embedded board in application circuits of access control systems and all for in-circuit evaluation.



Jumper Connections:

  J1
Power Selection between DC input and USB
J2
Output format selection (Short - WIEGAND 26, Open - Serial TTL & RS-232)

Features:

  • Onboard micro RFID reader module
  • Operating frequency 125kHz
  • Current Rating < 50mA
  • Reading distance 10-15 cm
  • Communication parameters 9600bps, 8-N-1
  • Supports Tags which work at 125kHz
  • RS232 (DB9) and TTL Interfaces for serial RFID data
  • Jumper Selection for output format: Serial & Wiegand 26
  • Wiegand 26 output pins brought out on board
  • LEDS for visual status indication; Power and Tag Detection
  • Audio alert on tag detection
  • Multiple options for powering; via USB port, DC barrel jack or RMC connectors
  • 5V on board regulation for DC power input
  • Fuse protection when USB powered
  • DC voltage input: 7~9V
Dimensions:
  • Length: 80mm
  • Width: 47mm
  • Height: 14mm
Package Includes:
  • 1 x μRFID with Base Board (RS232, TTL)
  • 2 x Jumpers - 2.54mm
Resources:

Write a review

Please login or register to review